Archive:GPU-Performance/uk

Попередження

Перш ніж вносити будь-які зміни до налаштувань вашої системи, будь ласка, ретельно ознайомтеся з настановами і спробуйте зрозуміти сенс ваших дій. Якщо ви вносите зміни до будь-яких файлів вашої системи, створіть початкові копії цих файлів і переконайтеся, що ви знаєте як повернутися до початкових налаштувань, навіть якщо не вдасться запустити графічний сервер.

Попередження

Внесення деяких з пропонованих нижче змін може збільшити поточну температуру графічного процесора вашої системи. Вам слід уважно спостерігати за вашою графічною карткою, — вона не повинна перегріватися!

Вступ

Деякі з популярних графічних карток, особливо графічні картки виробництва NVIDIA, мають проблеми зі швидкодією у середовищі KDE4. Ці проблеми в основному стосуються роботи Плазми (стільниці KDE4) та KWin (програми для керування вікнами у KDE). Загалом кажучи, причиною є не помилки у оптимізації роботи KDE4, а проблеми з драйверами графічної підсистеми. Нещодавні версії ноутбуків на основі графічних процесорів Intel також є доволі проблемними. На цій сторінці подано огляд деяких з проблем, які можуть виникнути, та способів їх усування.

Загальні настанови

Драйвери графічної підсистеми

Обидва основних постачальники мікросхем графічних підсистем мають по декілька різних драйверів, яким можна користуватися:

• For NVIDIA cards there's the free nv and the proprietary nvidia driver. While KDE4 should work fine with the former, it doesn't offer 3D acceleration, so the latter may be your only choice. All Most NVIDIA subsections herein only refer to the proprietary driver (there's also a 3rd free driver called nouveau that's currently under development. Unfortunately I don't know how usable it is so far). Due to licensing restrictions most distributions don't install the proprietary driver by default. Please refer to your distribution for information on how to install it.
  • Update: Nvidia has recently issued a new beta driver which is supposed to address most of the performance problems seen with KDE4. It can be downloaded in 64bit and 32bit versions. You need to add some options to your xorg.conf and enable certain feature at runtime, see this post on the NvNews forums for details. Note: Only install beta drivers if you know what you are doing.
  • Update 2: NVIDIA have released a new version 177.68 of beta drivers which fixes a couple of bugs and should improve performance with the KDE 4 OpenGL compositing manager. More info and downloads here. The latest beta version is 177.70 and it should enhance performance when dragging Plasma applets and fix some text rendering performance and corruptions. More info here.
  • Update 3: NVIDIA's 177.70 version of beta drivers has improved support for RENDER operations with the same source, and destination; this should enhance performance in some situations, e.g. when dragging Plasma applets in KDE4. More info here.
  • Update 4: NVIDIA's 177.80 version of beta drivers out here; some performance problem were fixed.
  • Update 5: NVIDIA's 180.08 version of beta drivers out here; some performance problem were fixed. Also check here for the latest version of beta drivers.

• For AMD/ATI cards you also have a few options. There are the free "ati" and "radeonhd" drivers for X.org ("ati" is also referred to as "radeon", without "hd", but most xorg driver packages I've seen seem to call it "ati"). Most distributions seem to default to "ati" which is compatible with cards from the earliest Radeons onwards; "RadeonHD", as the name suggests, is only for R500 and later generation cards - in retail model numbers that's the X1300 and later. Both basically should run OK for a standard desktop and they share the same 3D code in mesa so should be similar for desktop effects (note, 3D support for cards newer than R300 is considered unstable and for R600 and later is very experimental). Nonetheless, if you have an X1300 or later card (i.e. one that should be supported by both drivers) and you run in to problems with one it may be worth trying out the other. You also have the option of trying the proprietary fglrx driver, though this has limited support for older cards - there's more on the AMD/ATI website about this option. Some distributions package this or have third party repos that package it and this is likely to be easier than downloading from AMD directly.

It's usually advisable to stay up-to-date as improvements are being made in the drivers. Thus a first step in improving your KDE4 experience should be checking your current driver and updating if it's outdated. Please refer to your distribution's documentation on how to do that.

Хоча встановлення тестових версії драйверів може покращити швидкодію графічної підсистеми, не варто встановлювати такі драйвери, оскільки це найімовірніше призведе до погіршення стабільності роботи.

nvidia-settings

Параметри, встановлені за допомогою програми nvidia-settings не буде збережено на постійній основі, якщо програму не було запущено від імені користувача root. Увійдіть до облікового запису root у терміналі системи і запустіть цю програму командою

nvidia-settings&

Якщо ви цього не зробите, вам доведеться встановлювати ці параметри під час кожного запуску графічного сервера. Зробити це можна додаванням рядків параметрів до вашого файла ~/.xinitrc

nvidia — проблема з чорним екраном

It seems that older NVidia cards run into the problem that newly opened windows just are drawn as black windows or do not refresh properly anymore. This happens if composite is activated and openGL is used with many windows opened. Maybe the cards are running out of video memory? (The problem does occur with the compiz window manager as well.) In KDE4 you can deactivate composite/effects with Shift + Alt + F12 to continue your work with the desktop normally.

The problem is that drawing of the window decorations does become very slow if no composite is activated (tested with KDE4.3). As alternative to using openGL as composite engine it is recommended to use XRender in this case. Because moving effects become very slow with XRender you should turn animation speed to instant.

Системні параметри

KDE4's systemsettings allows you to tweak some kwin settings as well. You can find the settings in Desktop -> Desktop Effects -> Advanced Options. Depending on your card either OpenGL or XRender might work better. For OpenGL changing the OpenGL mode might change performance as well. Please bear in mind that changing some of the tweaks mentioned below might force you to change your settings.

(Зауваження від користувача): режим XRender значно покращив роботу у системі з пропрієтарним драйвером і 6800 GT (agp), особливо під час перегляду відео (177.80).

Приклади:

• Встановлення для параметра InitialPixmapPlacement значення 2 може покращити швидкодію Плазми, але призвести до несподіваних зависань kwin.
• Встановлення режиму OpenGL у значення Shared Memory може зменшити час реакції kwin на події.
• (зауваження від користувача) Якщо не позначати пункт "Use Vsync", значно покращується швидкодія на gforce 6800 (а також на GeForce 8400M GT).

If for some reason your Xserver hangs after hitting the Apply button on the dialog and your settings get reverted because you can't confirm your changes in time, try again. Usually it will be faster on one of the subsequent tries. If it doesn't you can still change your settings in ~/.kde4/share/config/kwinrc.

XGL

If after installing the NVIDIA's 177.80 versions beta drivers you're still experiencing bad performance (especially on 8xxx-9xxx series) you can install XGL xserver. Please refer to your distribution's documentation on how to do that.

Note

XGL has *a lot* of issues regarding 3d applications, xvideo and keyboard layout but, with certain video cards, is now the unique way to enjoy KDE4 at full speed. XGL actually 'bypass' the nvidia driver using the mesa library to render the desktop. OpenGL-based desktop effects cannot be run on XGL.

Fedora 10 (та пізніші версії) і xorg.conf (для деяких користувачів)

Деякі зі згаданих у цій статті налаштувань слід вказувати у файлі, який у більшості дистрибутивів зберігається за адресою /etc/X11/xorg.conf

Some users on Fedora 10, however, may find that this file is no longer present by default (depending on their card- anyone with more details on this please feel free to elaborate), and so it must be re-created. To do this, either:

Спосіб з використанням графічного інтерфейсу

• встановіть і запустіть програму «system-config-display» (Fedora, GNOME) (натискання кнопки Гаразд після завершення налаштування призведе до створення файла xorg.conf).

Спосіб без використання графічного інтерфейсу

1. open a command prompt
2. switch to runlevel 1 by running the command (as root):

   init 1

3. run

   Xorg -configure

   as root (once you're done, this will generate the xorg.conf file), or you can do

   sudo Xorg -configure :1

   without switching runlevel

Проблеми

У цьому розділі наведено резюме декількох симптомів проблем, з якими ви можете зіткнутися, та пояснення можливих причин.

Зміна розмірів деяких вікон відбувається ривками

• Explanation : This might be due to your card advertising ARGB Visuals (basically translucency) without having proper support for them. Applications/windows concerned are the Plasma Desktop, the KRunner dialog (Alt + F2), Plasma's Add new widget dialog or a konsole window.

• Test : If you want to make sure this issue is a problem for you, run

  XLIB_SKIP_ARGB_VISUALS=1 konsole

  on the command-line and try to resize the new konsole window (setting the environment variable XLIB_SKIP_ARGB_VISUALS turns off ARGB visuals). If it resizes without problems, then this is certainly one of the problems you're facing.

Note

I have found that this fixes Dolphin's preview delay too for me. Please confirm. --dpalacio 17:33, 27 July 2008 (CEST)

Загальні проблеми

• Ви можете вказати параметр BackingStore у вашому файлі xorg.conf:

У розділі пристроїв (Section "Device")

    ...
    Option "BackingStore" "true"
    ...
EndSection "Device"

Подібне вирішення працює для деяких (наприклад, konsole), але на жаль не для всіх вікон.

• As a last resort you can try setting

  XLIB_SKIP_ARGB_VISUALS=1

  in your ~/.xinitrc but this isn't pretty.

NVIDIA

• Ви можете встановити значення IntialPixmapPlacement за допомогою програми nvidia-settings:

$ nvidia-settings -a InitialPixmapPlacement=2

Це може допомогти для деяких (але, на жаль, не для всіх) карток NVIDIA.

NV/Intel

• Ви можете увімкнути режим прискорення EXA

У розділі "Device" файла xorg.conf впишіть

    ...
    Option "AccelMethod" "EXA"
# необов’язково, може покращити швидкодію, але призвести до видимих недоліків зображення
#    Option "MigrationHeuristic" "greedy" 
    ...
EndSection "Device"

З цими параметрами швидкодія буде дещо кращою на старіших версіях X-сервера (<=1.4.2) і значно кращою на останніх випусках X-сервера (>=1.4.99.901).

• The problem with poor effects performance also can be overcome by using Intel video drivers 2.6.3.1 ( in my case deb based distro ) or higher, with kernel 2.6.30-rc1 or higher verion, with enabled UXA in xorg.conf like this :

NOTE: If you use kernel 2.6.29, there is many bugs and xorg freeze randomly with enabled UXA extension.

Section "Device"
        Identifier      "Generic Video Card"
        Driver          "intel"
        Option "AccelMethod" "UXA"
EndSection

With this config, my i945G with PentiumD820, makes 350-500 FPS in Glxgears, and all effects runs perfect with Opengl render.

ATI

Ще не написано.

Швидкодія Плазми доволі погана

• Explanation : Unfortunately the reasons for plasma being choppy seem to be numerous so it's hard to tell where your choppiness comes from.

• Test : Usually plasma performance problems can be seen best on the Folder View plasmoid. Moving it or scrolling inside the folder might be pretty slow.

Загальні вирішення

• Please make sure this is not (only) related to the ARGB Visuals mentioned in the above section.

NVIDIA

• You can set the IntialPixmapPlacement and the GlyphCache option with the nvidia-settings utility:

  $ nvidia-settings -a InitialPixmapPlacement=2 -a GlyphCache=1

  This works for some (but unfortunately not all) NVIDIA cards. Some cards reportedly work better using

  InitialPixmapPlacement=1

  or maybe even

  InitialPixmapPlacement=3

• Options that are said to work well on 8xxx cards but are untested (by me)
  • Option "RenderAccel" "True"
    • enabled by default
  • Option "TripleBuffer" "True"
    • Enables triple buffering. "Decreases the time an application stalls while waiting for vblank events, but increases latency slightly" (NVIDIA Readme)
  • Option "DamageEvents" "True"
    • Recommended by NVIDIA if running composite+glx, increases performance, enabled by default
  • Option "UseCompositeWrapper" "True"
    • Enables the X server's composite wrapper instead of the builtin one.
  • Option "AllowIndirectPixmaps" "True"
    • Could improve hardware rendering on G80+ cards with more than 256 MB of video memory.
  • Option "BackingStore" "True"
    • Cache overlayed areas in case they get redisplayed later
  • Option "PixmapCacheSize" "200000"
    • allocate said number of pixels for pixmap caches
  • Option "OnDemandVBlankInterrupts" "True"
    • only fire VBlank interrupts in modes where they are needed

ATI

Ще не написано.

Перегляд тек та інші плазмоїди показано з помилками

• Explanation : Folder View' and some other widgets use hardware accelerated rendering. There are two methods to do this, and Plasma requires the newer EXA method.

• Test : This is best seen on the Folder View widget, which will appear as a distorted and seemingly random region on the screen.

Драйвер з відкритим кодом radeon

The Open Source radeon driver uses the XAA acceleration method by default. So you need to change the acceleration method from XAA (X Acceleration Architecture) to the newer EXA. As this involves editing your xorg.conf file, bear in mind that if you make an error, it may result in X not starting on your system, so first save a copy of the existing xorg.cong file.

To make the switch, edit your xorg.conf file. Locate the Device section for your graphics card. Before the "EndSection" line, add

Option "AccelMethod" "EXA"

If there is already a line with AccelMethod, change it from XAA to EXA. Save the file and restart the X server.

Note that using EXA may result in some older applications, such as some KDE3 programs being rendered incorrectly.

When using EXA it is strongly recommended to use a recent X server, at least 1.6.x or even better the new 1.7 release -- perhaps best to wait for 1.7.1.

If you have an AGP-based card then you may also want to add the following line at the same location into the configuration file.

Option "AccelDFS"    "true"

This should accelerate the driver even more, but may get you a hardlock when starting X. So be cautious with this option. See this article for more information on this topic.

Деякі речі, які можуть покращити швидкодію для будь-якої картки

The first one refers particularly to systems running KDE prior to 4.3.1 -

• Try to avoid using many widgets on your desktop, particularly if they are of the dynamic updating type.

• Turn off transparency/translucency, choosing themes that don't use it.

• Use a theme with transparency, but change the configuration. Set the fade time to zero.
  • There are two ways to do this, both in the desktop-effects systemsettings dialog. One, on the General tab, set animation speed to Instant.
  • Two, on the All Effects tab, find translucency, configure it, and set fading duration to 0 to 10 or so. (The spinner increments are 100 ms, so the 10 ms suggestion is only a tenth of that.)

These hints won't turn an old graphics card into a fast one, but they will make Desktop Effects a feasibility on many older cards.

Використання ефектів стільниці призводить до непередбачуваних зависань системи

This seems to affect Intel and ATi cards. AccelMethod seems to be the culprit. The default acceleration path for most drivers right now is the outdated and slower XAA (Option "AccelMethod" "XAA") which is not recommended anymore, especially with compositing. Unfortunately, the proprietary binary blobs of ATI and NVidia still only support XAA

ATi

Спробуйте увімкнути прискорення EXA додаванням наступних двох рядків до файла xorg.conf

Section "Device"
   Option      "UseAtomBIOS" "true"
   Option      "AccelMethod" "EXA"
   # ...
EndSection

This works with both the radeon as well as the radeonhd driver but only with cards up to an X1950. HD2xxx and above aren't supported yet.

AtomBIOS is automatically used by the radeon driver, so that line will need to be commented out. If you have the radeonhd driver, however, you will need it. EXA is expected to become the default in the near future, but having it specified here is unlikely to cause any problems even then. 3D and EXA support for HD2xxx and above is expected later this year (2009) as they are already in an experimental branch.

Intel

It's worth checking Xorg.0.log for mention of EXA. If you don't find it (or UXA) try adding the EXA line as described in the ATi section. UXA is an experimental option, but only supported by a few drivers. It's likely that the best bits will be merged into EXA soon.

Phoronix forums is a good place to read more about this.

Вікно KRunner (Alt+F2) виглядає якось дивно

NVIDIA

KRunner display problems

On NVIDIA cards krunner's dialog might appear several times below each other (with only the topmost one editable). This is related to setting InitialPixmapPlacement=1 as recommended above. There's currently no known way to remedy this problem. However, it only appears on one relatively early version of KDE 4.

Зникла більша частина піктограм у системному лотку

At some point you may have been told to add KDE_SKIP_ARGB_VISUALS to either ~/.bash_profile, /etc/profile or in ~/.profile. If that rings a bell for you, hunt for it and comment it out. You may find that they magically re-appear. Otherwise, check the Qt4 libraries you are using. In my case I needed Qt 4.4.3 together with KDE 4.2.

Посилання

-- Performance tweaks to the 177.67 Nvidia beta driver

-- Thread about graphics issues on the NVIDIA forums.