Kdenlive/Manual/Transitions/da: Difference between revisions

Revision as of 08:10, 30 July 2017

Other languages:

Overgange

Overgange styrer, hvordan Kdenlive går fra et klip til det næste. Du kan tilføje mange forskellige overgangseffekter ved hjælp af Kdenlives overgange.

Hvordan man tilføjer en overgang

For at tilføje en overgang skal klippene justeres på tidslinjen, sådan at afslutningen af det ene klip overlapper med begyndelsen af det andet.

Højreklik så på tidslinjen der, hvor overlappet forekommer, vælg Tilføj overgangog vælg en af overgangene fra undermenuen.

Se Kom godt i gang - overgange

Properties Tab (version >= 15.12)

In kdenlive version 15.12 the effect stack is merged with the "Transition" Tab to create a "Properties" window/tab.

The Properties window displays the settings for the effects on the currently selected clip (Figure 1) or the settings for the currently selected transition (Figure 2) depending on whether it is a clip or a transition that is currently selected.

Figure 1 - Properties when a clip with effects is selected

Figure 2 - Properties when a transition is selected

If you select the transition in the timeline its properties will appear in the Properties tab (Figure 2).

You should preview your transition to make sure it is running in the direction you expect. For example, if it is a Dissolve transition and it is running in the correct direction, then the first clip should dissolve into the second clip. But if it is in the wrong direction, the first clip will suddenly disappear (replaced by the second track). It will then fade back in and abruptly jump to second clip. If your transition is in the wrong direction, just select the Reverse check box in the Properties tab.

Fanebladet Overgange

Hvis du markerer overgangen i tidslinjen så vises dens egenskaber i fanebladet Overgange.

Hvis dialogen Overgange ikke er synligt, så brug menuen Vis -> Overgange for at tilføje den.

Du bør nu få forhåndsvist din overgang for at sikre dig, at den kører som du forventer. Hvis det for eksempel er en opløs-overgang og den kører i den rigtige retning, så skal det første klip opløses og det nye dukke op; men hvis den kører i den forkerte retning, så vil det første klip pludseligt forsvinde (erstattet af det andet klip): Det vil så gradvist dukke op igen og til sidst abrubt springe til det andet klip. Hvis din overgang går den forkerte vej, så markér blot checkboksen Invertér i fanebladet Overgange.

Hvordan man opretter overgange med et enkelt klik

There is a shortcut for creating transitions between two tracks that overlap.

In Version 17.04 you hover the mouse over the lower grey rectangle that appears at the end of the clips on the timeline and a tool tip will appear saying "Click to add Transition". If you click a dissolve transition will be automatically added.

Older Versions: If you hover the mouse over the overlapping region on the timeline, a green triangle will appear. Clicking this adds a dissolve transition between the tracks.

Automatiske overgange

Som standard oprettes nye overgange som "Automatiske overgange". Det betyde, at hvis du justerer overlappet imellem de to klip involveret i overgangen, så vil længden af overgangen automatisk blive justeret til at dække hele den region, hvor klippene overlapper.

Du kan slå denne funktion til og fra ved at markere overgangen og vælge Automatisk overgang i menuen Klip. Når automatisk overgang er slået fra og du flytter et klip for at ændre overlapsområdet, så tilpasses overgangens længde ikke automatisk.

Miksning af titler, billeder og video ved hjælp af overgange

{{#ev:youtube|f6VHlOZutm8|500|left|Image and Title Layers Transparency Tutorial - qubodupl/Open Source Bug}}

Liste med overgange

Se også Effekter og overgange for en alfabetisk liste over effekter og overgange.

Se også Alfaoperationsovergange for en sammenligning af de forskellige typer alfaoperationsovergange (addition, addition_alpha, alphaatop, alphain, alphaout, alphaover and alphaxor).

FAQ

Q: Hvordan tilføjer man en overblændingseffekt?

A: Få et par klip i hvert sit spor til at overlappe i tid og klik så på den grønne trekant, som lyser op i hjørnet af det øverste klip (se overgang).

@@ Line 15: / Line 15: @@
 Se [[Special:myLanguage/Kdenlive/Manual/QuickStart#transition|Kom godt i gang - overgange]]
+=== Properties Tab (version >= 15.12)===
+In kdenlive version 15.12 the effect stack is merged with the "Transition" Tab to create a "Properties" window/tab.
+The Properties window displays the settings for the effects on the currently selected clip (Figure 1) or the settings for the currently selected transition (Figure 2) depending on whether it is a clip or a transition that is currently selected.
+{|class="tablecenter" style="border: 1px solid grey;"
+|
+[[File:Kdenlive selection param1.png|thumb|left|527px|Figure 1 - Properties when a clip with effects is selected]]
+||
+[[File:Kdenlive selection param2.png|thumb|left|527px|Figure 2 - Properties when a transition is selected]]
+|}
+<div class="clearfix"></div>
+If you select the transition in the timeline [[File:Transition on timeline.png]] its properties will appear in the '''Properties''' tab (Figure 2).
+You should preview your transition to make sure it is running in the direction you expect. For example, if it is a Dissolve transition and it is running in the correct direction, then the first clip should dissolve into the second clip. But if it is in the wrong direction, the first clip will suddenly disappear (replaced by the second track). It will then fade back in and abruptly jump to second clip. If your transition is in the wrong direction, just select the Reverse check box in the Properties tab.
 === Fanebladet Overgange ===
@@ Line 28: / Line 44: @@
 === Hvordan man opretter overgange med et enkelt klik ===
-Der er en genvej til at oprette overgange imellem to spor, som overlapper. Hvis du lader musen svæve over det overlappende område på tidslinjen, så dukker der en grøn trekant op. Klik på den for at tilføje en opløs-overgang imellem sporene.
+There is a shortcut for creating transitions between two tracks that overlap.
+In Version 17.04 you hover the mouse over the lower grey rectangle that appears at the end of the clips on the timeline and a tool tip will appear saying "Click to add Transition". If you click a dissolve transition will be automatically added.
+{{#ev:youtube|e1f0Yc8Fh3c}}
+Older Versions:
+If you hover the mouse over the overlapping region on the timeline, a green triangle will appear. Clicking this adds a dissolve transition between the tracks.
 {{#ev:youtube|h1k7GbEssqA}}