KMail/FAQ'er, Vink og Tips
Er mit problem allerede kendt?
Symptom: Du har et problem med KDE-PIM og vil gerne vide, om andre har rapporteret og løst problemet. Du spekulerer på, hvordan du kan læse arkiverne af postlisten for kde-pim.
Løsning: Dette er en god vane at opdyrke. Prøv MARC-arkiverne her: http://lists.kde.org/?l=kdepim-users&r=1&w=2
Configuration
Gem sendte mails i en særlig mappe
Symptom: Du ønsker at gemme mails i en særlig mappe. Måske bruger du en IMAP-server og vil gemme dine mails på serveren, ikke i klienten.
Løsning: I Kontact vælger du
Gem slettede mails i en særlig mappe
Symptom: Du ønsker at gemme mails i en særlig mappe. Måske bruger du en IMAP-server og vil gemme dine slettede mails på serveren, ikke i klienten.
Løsning: I Kontact vælger du
I nogle versioner skal du vælge
Gem krypterede mails ukrypteret
Symptom: Du udveksler krypteret mail med en ven, men vil gerne gemme den ukrypteret efter at have åbnet den.
Løsning: For at gemme emails, som er blevet krypteret en gang i ukrypteret form for fremtiden skal du tilføje dette til konfigurationsfilen kmailrc i afsnittet [Reader]:
store-displayed-messages-unencrypted=true
Dette virker måske kun med SMIME, men der arbejdes på en implementation for OpenPgP.
Filtrering af spam på en IMAP-server
Symptom: Du ønsker at overgå til at læse din mail fra en IMAP-server og spekulerer på, hvordan filtrering og håndtering af spam foregår?
Løsning: Maskinen, som allerede har din mail kan gøres til din IMAP-server. Du skal så konfigurere et serverprogram. Dovecot er et sådant, og vejledningen på projektets webside gør det let at sætte det op. Dette efterlader dig stadig med problemet med filtrering, da det er smart at gøre dette på serveren (når du dirigerer KMail til serveren, vil du se mapperne, som du har lavet på serveren). Som før er der flere muligheder, men en af de bedst kendte er procmail. Igen er der masser af information på internettet om, hvordan man sætter det op. Du giver det nogle "opskrifter" - her er et eksempel:
:0
* (^To|^CC|^List-ID): .*kde-linux
${MAILDIR}.INBOX.KDE-Lists.kde-users/
Hvis du har maildir-mapper, så skal hver opskrift afsluttes med et "/". Hvis dine mapper er mbox, så udelader du blot "/".
Hvis du har brugt bogofilter med KMail, så har du allerede en ordliste. Denne kan også bruges på serverniveau, så du behøver ikke at starte oplæringen fra grunden af. Tricket er at sætte dette før opskrifterne til procmail:
:0fw | bogofilter -e -p
:0e { EXITCODE=75 HOST }
:0: * ^X-Bogosity: Spam, tests=bogofilter ${MAILDIR}.INBOX.a-Spam/
:0e { EXITCODE=75 HOST }
:0: * ^X-Bogosity: Unsure, tests=bogofilter ${MAILDIR}.INBOX.a-Unsure/
:0e { EXITCODE=75 HOST }
Bemærk, at det skal bruge en mailbox til spam og en til tvivlsomme - Jeg tilføjer 'a-' til navnet for at sikre mig, at de ses let for oven i listen.
For at forbedre ydelsen, skal du køre følgende kommando en gang imellem på gemte spam og tvivlsomme:
/usr/share/bogofilter/contrib/trainbogo.sh -c -H /home/user/Maildir /.INBOX.bogotrain_ham/cur/ -S /home/user/Maildir/.INBOX.bogotrain_spam/cur/
(glem ikke at kontrollere stien.)
Dette er ikke en fuldstændig guide til at sætte en server op, blot noter til at opsætte serveren til at fungere, sådan som du forventer i KMail.
Få mere skærmplads i KMail
Symptom: Du bruger KMail under KDE 4.2 eller senere på en netbook og synes, at det nye Aggregation display giber dig for lidt skærmplads.
Løsning: I 4.2 har du et nyt sæt ikoner ved siden af hurtigsøgningslinjen. Du kan bruge disse til at vælge et andet tema og en anden samling. Hvis du vil ændre udseendet, sådan at en mail kun optage en søjle i stedet for to, så gå til 
(værktøjstippet siger ) og skift tema til . Hvis du vil deaktivere gruppering efter dato, sø skift samling 
til . Nu ser KMail ud præcis som den gjorde i tidligere versioner.
I 4.4 og 4.5 er disse indstillinger flyttet til hovedmenuen, og
Få mere skærmplads i KMail - reducér skriftstørrelse
Symptom: Du mangler stadig skærmplads og ville foretrække flere synlige linjer på bekostning af skriftstørrelsen, men dine forsøg virker kun delvist.
Løsning: I kan du vælge og ændre indstillingen for hver komponent i listen. Det er nu du opdager, at din mappeliste og brevkrop bruger den skrifttype, som du ønsker, men brevoversigten stadig har for stor en skrifttype.
Nu skal du finde ikonet (værktøjstippet siger ) blandt det nye sæt af ikoner øverst til højre, tæt ved søgeboksen. Vælg . Der er en liste af og under dem en model af søjleoverskrifter. Du skal klikke på hver af disse overskrifter og angive en ny selvvalgt skrifttype. Efter dette vil listen af breve blive vist med samme skrifttype som resten af dit layout.
I senere versioner, som ikke har disse ikoner laver du ændringerne ved at højreklikke på overskrifterne i listen af breve og vælge . Igen er det nødvendigt at gentage indstillingen for overskriften for hver søjle.
Deaktiver værktøjstips for KMail-mapper =
Symptom: Du bruger KMail i KDE 4.2 eller senere på en netbook og synes, at værktøjstipsene over mapperne gemmer for mange mappenavne.
Løsning: Et højreklik på overskriften frembringer en menu med adskillige indstillingsmuligheder. En af dem er med valgmulighederne , og . er praktisk, hvis du har mapper med lange navne, sådan at kun en del af dem bliver vist. For mapper, hvor du kan se hele navnet bliver værktøjstippet ikke vist.
Deaktiver værktøjstips for KMail-breve
I KMail vælger du og slår fra.
Fjern farvning af hver anden linje
I skal du for hvert farvesæt undtagen ændre til at være det samme som .
Mandriva bruger ikke navnet Systemindstillinger. Som i KDE 3's kontrolcenter KControl kaldes den "Indstil dit skrivebord" for at skelne den fra "Indstil din computer", også kaldet Mandriva Control Center (MCC). Bortset fra det er metoden som beskrevet ovenfor.
Migration
Overfør mails og indstillinger til en anden computer (eller en anden brugerkonto på samme maskine)
Solution: The messages are typically in ~/.kde/share/apps/kmail/. For very old installations of KMail, the messages can also be in ~/Mail. Note that KMail uses hidden sub-directories inside that directory, so you need to make sure to copy hidden directories as well.
For settings you will need to copy the following files:
- ~/.kde/share/config/kmailrc,
- ~/.kde/share/config/mailtransports, (since KDE 4.0)
- ~/.kde/share/config/emaildefaults and
- ~/.kde/share/config/emailidentities .
Your address book is usually stored in ~/.kde/share/apps/kabc/. Calendar data is in ~/.kde/share/apps/korganizer
Be aware that some distributions use ~/.kde4 instead of ~/.kde/ for their KDE configuration data.
From version 4.4 you may have some Akonadi-controlled entries that also need to be kept. Add to the above list -
- Everthing under ~/.local/share/
- Everything under ~/.config/akonadi/.
- ~/.kde/share/config/nepomukserverrc
- Everything under ~/.kde/share/apps/nepomuk/ (KAddressBook stores contact groups in Nepomuk.)
If you plan to use an USB stick as transport medium for your data, be sure to read section "Cannot copy mail to a USB stick" below.
Problem: Cannot copy mail to a USB stick
Symptom: You are setting up a new computer and want to transfer all your mail. You decide to copy everything to a usb stick. The job starts, then you start to get failure message,
Unable to copy ............Invalid argument
Solution: Your usb stick is (V)FAT formatted, and thus can't handle maildir folder names (nor can it handle permissions, which can cause many other problems). You have two choices. Either format your usb stick as ext2 (in which case you should be aware it can't be read on Windows OSes without installing additional software there) or create a tar file of all your mail, copy that to the stick and extract it to your new host.
Troubleshooting
Problem: You are losing mail
Symptom: You are losing mail. One message in your Inbox had an empty subject line and the date 1st January 1970. When you clicked on it, it was empty. When you clicked on the next message that changes to the same state.
Solution: This happens where there is corruption in your index files. First thing then, do notclick on any more messages.
- With the KMail 1.10 shipped with KDE 4.1 or newer, right click on the folder and select (you can do the same from the menu).
- With earlier KMail versions the process is slightly more complicated. Close KMail. In Dolphin, navigate to where your mail is stored (typically in ~/.kde/share/apps/kmail/) and look for index files associated with the affected mailbox. There will be two or three, and be easy to spot. them. They will be recreated when you re-start KMail. You will have lost the mails that had disappeared, but the rest of the mail should be visible again.
You have empty 'ghost-mails' in your inbox (or other folder)
Symptom: For some reason, certain messages aren't accessible in KMail. They show up in the message list window but selecting them there results in a blank message window. I can't open them or reply to them, etc.
Solution: This problem is most likely due to corrupted index files, see issue "You are losing mail" above. So just follow the advice given there.
Problem: Wrong address autocompletion
Symptom: You sent an email to a friend and mis-typed his address. Now that address keeps popping up as a suggestion, every time you try to send to the correct address. You can't find it in your addressbook.
Solution: Recent addresses are actually stored in /.kde/share/config/kmailrc, but rather than risk making a mistake in a manual edit, go to KMail's and you will see a button
Problem: Cannot follow a link in a mail
Symptom: You have set Firefox as your default browser, but when you click a URL in KMail it loads a local temporary version of the page with broken relative links.
Solution: You should add "%u" or "%U" to the Firefox executable in the settings. If that is not present KDE assumes that the application is not capable of handling remote urls (http) and hence creates a local copy first.
Problem: You get an authentication error message
Authentication support is not compiled into kio_smtp. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder.
Solution: Install the sasl-devel-package and recompile kdepimlibs. E.g. for SUSE the package is named cyrus-sasl-devel and you install it with the command
yast -i cyrus-sasl-devel
When running cmake to compile kdepimlibs, you will see:
-- The following external packages were located on your system. -- This installation will have the extra features provided by these packages. [...] + cyrus-sasl
This usually only affects self-build distros.
Problem: You can't find your Distribution Lists
Solution: See Special:myLanguage/KAddressBook
Your correspondents complain about your bottom-posting
Symptom: Your correspondents use mail agents that routinely top-post, and they complain that they have to scroll down to read your replies. You, on the other hand, post to mailing lists, where it is a requirement that you bottom post to maintain the natural order of reading.
Solution: Highlight the portion of your received message to which you want to reply, before hitting the icon or keyboard shortcut. The composer window that opens will quote only the section that you highlighted and your correspondents will be able to see your reply without unnecessary scrolling.
Error: Could Not Determine Resource Status
Symptom: When fetching mail, you get an error message reading like:
Error while getting folder information. Could Not Determine Resource Status An attempt to determine information about the status of the resource Unable to get information about folder INBOX.customflags. The server replied: Mailbox does not exist, or must be subscribed to., such as the resource name, type, size, etc., was unsuccessful. Technical reason: Could Not Stat Resource
Reason: You are using Courier IMAP as your mail server.
Solution: If you are your own mail server administrator, set up a different mail service, for example cyrus. Here is a description how to do it.
Problem: Kmail is slow
Symptom: Kmail is really slow to get your mails.
Solution: It might be that the spam tool you're using is slowing down Kmail. If you used Kmail tools menu to add a spam tool and added Spam Assassin (for example) then try another one. I noticed that bogofilter is much quicker. You'll need to remove the 1st one and add the 2nd. You'll then need to train the spam tool you just added (bogofilter): KMail Anti-Spam Tools
Symptom: You just copied your mail folders from an earlier version (see "Migration" above) and now Kmail is really slow to respond shortly after it starts up, for at least several seconds with Kontact burning 100% cpu.
Solution: Work through all your saved message folders and , from either the menu or right-click on the folder in the tree view side panel.
Symptom: You experience very long delays when sending messages, and KMail is frozen while you wait.
Solution: There was a bug in the various Release Candidates for KDE SC 4.4 which caused KMail to do lengthy searches for matching addresses. Updating to the full 4.4 should cure the problem.
KMail with other desktops or applications
Problem: KMail does not start up.
Symptom: You want to start KMail from a minimal desktop environment like fvwm2. It does not start.
Reason: You are missing the dbus functionality.
Solution: Start KMail using dbus-launch like this:
dbus-launch kmail
Tell Firefox to use KMail for mailto: addresses
Solution:
Firefox 2 - In the Firefox address bar, typeabout:config
Right-click anywhere in the window and select in the first dialogue field. Type
network.protocol-handler.app.mailto
and then
kmailservice
Close Firefox
Firefox 3 - In the Firefox menu, select , choose the tab, then typemailtoin the search box. Choose and find /usr/bin/kmailservice
Set Firefox as your default browser
Symptom: You want to click on a link in KMail and have it opened in Firefox. At the moment, another browser is used. You want to change this.
Solution: This solution will affect all of KDE, not just KMail. Start .
If you are an administrator and want to set this setting automatically for your users, it is
- for SUSE Linux
in your user directory in .kde4/share/config/kdeglobals add the line
BrowserApplication[$e]=!firefox
under category
- for all other Linux distributions:
in your user directory in .kde/share/config/kdeglobals add the line
BrowserApplication[$e]=!firefox
under category If General category does't exist you should add it.
You can also use the script in Tutorials/Modify_KDE_defaults
Control your Roaming profile's connection
Symptom: You set up a Roaming profile to access your home server while you are on the road, but it keeps trying to connect even when you are at home. Auto-connection is disabled in the setup screens.
Solution: , uncheck . This will exclude the profile when you hit the download icon, but the profile will still be available from the drop-down list, making it easy to get your mail while away from home.
Hints and Tips
Add a Tag to aid searching
You must first define your tags, which is done in . Now you will find that the (right-click) context menu, under , offers you the choice of your defined tags.
Watch threads
If you want to follow a thread, right click and choose .
From this point on all messages on the thread that starts in this message will be marked as Watched.
Watch your own threads:
This is useful in case you are registered to a mailing list such as kdepim-users@kde.org and want to filter out the threads you participate in.
Create a filter to mark all your incoming messages to a mailing list as "Watched"
To create a filter go to:
- select
- Add the conditions:
- yourmail@maildomain [1]
- listID [2]
[1]replace yourmail@maildomain with your outgoing mail address
[2]replace listID with a specific mailing list id e.g (<kdepim-users.kde.org>) or just a '.' to include outgoing mail to all mailing list with '.' in their id (basically all).
- Under choose .
In the tab
- Uncheck .
so that other filters such as sorting the incoming messages from the mailing list to sub-folders would execute.
- Place that filter before other filters that may stop the filtering process,
or simply put it first. (changing the filters order is done using the two arrows up and down, under the )
Create a search on mailing list messages
Go to the folder where your mailing list messages are stored e.g (Local Folders/KDE-PIM-USERS) and hit S key or in the menu .
- Select [3]
- Add the condition:
- Give the search an informative name (Search folder name) like KDE-PIM-USERS-Watched
- Make the search. After it is done you can close the search window.
Now whenever you start a thread or participate in one, it is Watched.
[3] Pay attention to the .
E-Mail Translation
Symptom: you receive mail messages in different languages and want to translate them without doing lots of copy and paste.
Solution: using an external program to translate our E-Mail and display it.
Step by step implementation
- Prerequisites, make sure you have those before starting
- libtranslate
- perl
- perl module Email::MIME
- kmail
- Setting up a pipe filter
- In Kmail go to
- create a new filter and name it Translate
- add a Filter Criteria that would be always true (e.g
- add a Filter Action
~/bin/mail_translate.pl
- open the Advanced tab and un-check everything except for , you can also set a shortcut and an icon here.
- In Kmail go to
- Putting the script in place and configuring it
- save the following script to a file named mail_translate.pl and put it in your ~/bin directory.
#!/usr/bin/perl use Email::MIME; my $from_language = 'en'; my $to_language = 'he'; my $translation_command = "translate "; my $languages_pair = "-f $from_language -t $to_language"; my $line; my $message=''; while ($line=<>) { $message.=$line; } my $email = Email::MIME->new($message); my @parts = $email->parts; my $separator = `echo "translation" | $translation_command -f en -t "$to_language" -`; chop $separator; rec_parts ($email,@parts); sub rec_parts { my $parent = $_[0]; my @parts = $_[1]; for $part(@parts) { my @sub_parts = $part->parts; if (@sub_parts > 1) { rec_parts ($part,@sub_parts); } my $type=$part->content_type; if (( $part->content_type =~ m[text/plain]gi )||( $part->content_type eq '')) { my $body = $part->body; $body=~s/['"`]*//g; my $translation_body=`echo "$body" | $translation_command $languages_pair -`; $translation_body=~s/['"`]*//g; my $msg=$body."\n\n---"."$separator"."---\n\n".$translation_body; `kdialog --title "$separator" --msgbox "$msg"`; } } } print $email->as_string;
- Make the script executable using
$chmod a+x ~/bin/mail_translate.pl
- Configuring the script to suit your needs.
- Currently the script will translate from English (en) to Hebrew (he), you probably need another type of translation. To change that settings look inside the script for the phrase $from_language = 'en' and $to_language = 'he' and replace the 'en' and 'he' parts with the combination you need, if you are not sure, a full list of language codes is available from the ISO 639-2 list.
- Testing
- before charging innocent E-Mails and translating them first try that on something you don't mind to lose, look in your trash or spam folder. Right click on any translatable item A dialog box should pop-up with the original message followed by it's translation.
- Troubleshooting
- If the script is not working you can test it outside of KMail to narrow down the responsible component. Save a mail message as 1.mbox file and run in the terminal
$~/bin/mail_translate.pl < 1.mbox > 2.mbox
- If the script is not working you can test it outside of KMail to narrow down the responsible component. Save a mail message as 1.mbox file and run in the terminal
- Testing
If the output file 2.mbox is not the same as 1.mbox then there is a problem in the script and it shouldn't be used.