KDevelop4/Manual/Working with source code: Difference between revisions

From KDE Wiki Sandbox
Line 67: Line 67:
{{Note|1=The information in a tooltip is fleeting &mdash; it depends on you holding the <code>ALT</code> key down or hovering your mouse. If you want a more permanent place for it, open the <code>Code Browser</code> tool view in one of the sub-windows. For example, here the cursor is on the same function as in the example above, and the tool view on the left presents the same kind of information as in the tooltip before:
{{Note|1=The information in a tooltip is fleeting &mdash; it depends on you holding the <code>ALT</code> key down or hovering your mouse. If you want a more permanent place for it, open the <code>Code Browser</code> tool view in one of the sub-windows. For example, here the cursor is on the same function as in the example above, and the tool view on the left presents the same kind of information as in the tooltip before:


[[image:kdevelop-15.png|thumb|600px|center]]
[[image:kdevelop-15.png|thumb|500px|center]]
 
Moving the cursor around on the right changes the information presented on the left. What's more, clicking on the "Lock current view" button at the top right allows you to lock this information, making it independent of the cursor movement while you explore the information presented there.}}


Moving the cursor around on the right changes the information presented on the left.}}
{{Note|1=This sort of context information is available in many other places in '''KDevelop''', not just in the source editor. For example, holding down the <code>ALT</code> key in a completion list (e.g. when doing a quick-open) also yields context information about the current symbol.}}
{{Note|1=This sort of context information is available in many other places in '''KDevelop''', not just in the source editor. For example, holding down the <code>ALT</code> key in a completion list (e.g. when doing a quick-open) also yields context information about the current symbol.}}



Revision as of 00:46, 22 May 2011

Working with source code

Besides debugging, reading through and writing source code is what you will spend the most time with when developing software. To this end, KDevelop offers you many many different ways to explore source codes and to make writing it more productive. As discussed in more detail in the following sections, KDevelop is not just a source editor — rather, it is a source management system that gives you different views of extracted information on the files that collectively make up your session's source code.

Tools and views

In order to work with projects, KDevelop has the concept of tools. A tool provides a particular view of the source, or an action that can be taken with it. Tools are represented by buttons around the perimeter of your window (in vertical text along the left and right margins, or horizontally along the bottom margin). If you click on them, they expand to a subwindow — a view — within the main window; if you click on the tool button again, the subwindow disappears again.

Note
To make a subwindow disappear, you can also click at the x at the top right of the subwindow; however, at least with KDevelop 4.2.x, this also removes the button representing the tool from the perimeter, which was your way of getting the subwindow back. See below for how to get the button back onto the perimeter in the same way as getting any tool's button there. This behavior has been reported as bug 270018


The picture above shows a particular selection of tools, aligned on the left and right margins; in the picture, the Classes tool is open on the left and the Snippets tool on the right, along with an editor for a source file in the middle. In practice, most of the time you will probably only have the editor and maybe the Classes or Code Browser tool open at the left. Other tool view will likely only be open temporarily as you use the tool, leaving more space for the editor most of the time.

When you run KDevelop the first time, you should already have the Projects tool button. Click on it: it will open a subwindow that shows the projects you have added to the session at the bottom, and a file system view of the directories of your projects at the top.

There are many other tools you can use with KDevelop, not all of which are initially present as buttons on the perimeter. To add some, go to the Windows -> Add tool view menu entry. Here are some that you will likely find useful:

  • Classes: A complete list of all classes that are defined in one of the projects or your session with all of their member functions and variables. Clicking on any of the members opens a source editor window at the location of the item you clicked on.
  • Documents: Lists some of the more recently visited files, by kind (e.g. source files, patch files, plain text documents).
  • Code Browser: Depending on your cursor position in a file, this tool shows things that are related. For example, if you are on an #include line, it shows information about the file you are including such as what classes are declared in that file; if you are on an empty line at file scope, it shows the classes and functions declared and defined in the current file (all as links: clicking on them brings you to the point in the file where the declaration or definition actually is); if you are in a function definition, it shows where the declaration is and offers a list of places where the function is used.
  • File system: Shows you a tree view of the file system.
  • Documentation: Allows you to search for man pages and other help documents.
  • Snippets: This provides sequences of text that one uses over an over and doesn't want to write every time. For example, in the project from which the picture above was created, there is a frequent need to write code like
    for (typename Triangulation<dim>::active_cell_iterator cell = triangulation.begin_active(); cell != triangulation.end(); ++cell)
    This is an awkward expression but it will look almost exactly like this everytime you need such a loop — which would make it a good candidate for a snippet.
  • Konsole: Opens a command line window inside KDevelop's main window, for the occasional command you may want to enter (e.g. to run ./configure).

A complete list of tools and views is given here.

For many programmers, vertical screen space is the most important. To this end, you can arrange your tool views at the left and right margin of the window: to move a tool, click on its symbol with the right mouse button and select a new position for it.

Exploring source code

Local information

KDevelop understands source code, and as a consequence it is really good at providing you information about variables or functions that may appear in your program. For example, here is a snapshot of working with a piece of code and hovering the mouse over the symbol cell in line 1316 (if you are working keyboard oriented, you can achieve the same effect by holding down the ALT for a while):

KDevelop shows me a tooltip that includes the type of the variable (here: DoFHandler<dim&rt;active_cell_iterator), where this variable is declared (the container, which here is the surrounding function get_maximal_velocity since it is a local variable), what it is (a variable, not a function, class or namespace) and where it is declared (in line 1314, just a few lines up in the code).

In the current context, the symbol over which the mouse was hovering has no associated documentation. In this example, had the mouse hovered over the symbol get_this_mpi_process in line 1318, the outcome would have been this:

Here, KDevelop has cross-referenced the declaration from an entirely different file (utilities.h, which in fact even resides in a different project of the same session) together with the doxygen-style comment that accompanies the declaration there.

What makes these tooltips even more useful is that they are dynamic: I can click on the container to get information about the context in which the variable is declared (i.e. about the namespace System, such as where it is declared, defined, used, or what its documentation is) and I can click on the blue links that will reset the cursor position to the location of the declaration of the Symbol (e.g. in utilities.h, line 289) or give me a list of places where this symbol is used in the current file or throughout all the projects of the current session. The latter is often useful if you want to explore how, for example, a particular function is used in a large code basis.

Note
The information in a tooltip is fleeting — it depends on you holding the ALT key down or hovering your mouse. If you want a more permanent place for it, open the Code Browser tool view in one of the sub-windows. For example, here the cursor is on the same function as in the example above, and the tool view on the left presents the same kind of information as in the tooltip before:
Moving the cursor around on the right changes the information presented on the left. What's more, clicking on the "Lock current view" button at the top right allows you to lock this information, making it independent of the cursor movement while you explore the information presented there.


Note
This sort of context information is available in many other places in KDevelop, not just in the source editor. For example, holding down the ALT key in a completion list (e.g. when doing a quick-open) also yields context information about the current symbol.


File scope information

The next level up is to obtain information about the entire source file you are currently working on.

Navigating in source code

Modes and working sets

If you've gotten this far, take a look at the upper right of the KDevelop main window: As shown in the picture, you will see that there are three modes KDevelop can be in: Code (the mode we discuss in the current chapter on working with source code), Debug (see Debugging programs) and Review (see Working with version control systems).

Each mode has its own set of tools that are stacked around the perimeter, and each mode also has a working set of currently open files and documents. Furthermore, each such working set is associated with a current session, i.e. we have the relationship shown above. Note that the files in the working set come from the same session, but they may come from different projects that are part of the same session.

If you open KDevelop the first time, the working set is empty — there are no open files. But as you open files for editing (or debugging, or reviewing in the other modes) your working set grows. The fact that your working set is non-empty is indicated by a symbol in the tab, as shown below. You will notice that whenever you close KDevelop and later start it again, the working set is saved and restored, i.e. you get the same set of open files.

If you hover your mouse over the symbol for the working set, you get a tooltip that shows you which files are currently open in this working set (here: the step-32.cc and step-1.cc files). Clicking on the red minus sign closes the tab for the corresponding file. Maybe more importantly, clicking on the correspondingly named button allows you to close the entire working set at once (i.e. to close all currently open files). The point about closing a working set, however, is that it doesn't just close all files, it actually saves the working set and opens a new, still empty one. You can see this here:

Note the two symbols to the left of the three mode tabs (the heart and the unidentifiable symbol to its left). Each of these two symbols represents a saved working set, in addition to the currently open working set. If you hover your mouse over the heart symbol, you'll get something like this:

It shows you that the corresponding working set contains two files and their corresponding project names: Makefile and changes.h. Clicking Load will close and save the current working set (which as shown here has the files tria.h and tria.cc open) and instead open the selected working set. You can also permanently delete a working set, which removes it from the set of saved working sets.

Some useful keyboard shortcuts

KDevelop's editor follows the standard keyboard shortcuts for all usual editing operations. However, it also supports a number of more advanced operations when editing source code, some of which are bound to particular key combinations. The following are frequently particularly helpful:

Jumping around in code
Ctrl+Alt+O Quick open file: enter part of a filename and select among all the files in the current session's projects' directory trees that match the string; the file will then be opened
Ctrl+Alt+C Quick open class: enter part of a class name and select among all class names that match; the cursor will then jump to the class declaration
Ctrl+Alt+M Quick open function: enter part of a (member) function name and select among all names that match; note that the list shows both declarations and definitions and the cursor will then jump to the selected item
Ctrl+Alt+Q Universal quick open: type anything (file name, class name, function name) and get a list of anything that matches to select from
Ctrl+Alt+N Outline: Provide a list of all things that are happening in this file, e.g. class declarations and function definitions
Ctrl+, Jump to definition of a function if the cursor is currently on a function declaration
Ctrl+. Jump to declaration of a function or variable if the cursor is currently in a function definition
Ctrl+Alt+PageDown Jump to next function
Ctrl+Alt+PageUp Jump to previous function
Ctrl+G Goto line
Searching and replacing
Ctrl+F Find
F3 Find next
Ctrl+R Replace
Ctrl+Alt+F Find-Replace in multiple files
Other things
Ctrl+_ Collapse one level: remove this block from view, for example if you want to focus on the bigger picture within a function
Ctrl++ Expand one level: undo the collapsing
Ctrl+D Comment out selected text or current line
Ctrl+Shift+D Comment in selected text or current line
Alt+Shift+D Document the current function. If the cursor is on a function or class declaration then hitting this key will create a doxygen-style comment pre-populated with a listing of all parameters, return values, etc.
Ctrl+T Transpose the current and the previous character
Ctrl+K Delete the current line (note: this is not just emacs' "delete from here to the end of the line")