Template:SearchPages

From KDE Wiki Sandbox

Find pages among a given subset of English pages containing a string: {{SearchPages|pages|string}} finds all pages containing the string in pages matching pages. Searches are case sensitive. In order to find both xyz and Xyz use a regular expression: {{SearchPages|...|[Xx]yz}}.

Regular expressions use a perl like syntax. Special characters like '[', '[','(' and ')' need to be escaped.

Information
If the title patterns contain space characters use '_' in stead, i.e. use System_Settings to search all pages whos path name contain System Settings.


No wiki expansion takes place before passing arguments to the template.

Warning
Due to the limitations of the underlying database queries, the search should involve less that 500 pages. To check that this limit is not exceeded, the number of pages in each search is also printed. Should the page count exceed 500, some pages will have been ignored. The template then needs to be modified!


Example: {{SearchPages|1=System_Settings|2=[Ss]creen}} gives

A total of 462 pages were searched

Add actions that are triggered by swiping from the screen edge towards the center of the screen.

Touch Screen settings
Touch Screen settings

More information

Add actions that are triggered by swiping from the screen edge towards the center of the screen.

Touch Screen settings
Touch Screen settings

Plus d'information

Tilføj handlinger, som bliver udløst ved at swipe fra en skærmkant mod midten af skærmen.

Indstilling af Touchskærm
Indstilling af Touchskærm

Mere information

Plasma let you fully customize your workspace theme.

Plasma Theme

Configure the plasma theme.

Cursors

Change the look of the mouse cursor.

Splash Screen

Change the splash screen.

<translate>

Add actions that are triggered by swiping from the screen edge towards the center of the screen.

Touch Screen settings
Touch Screen settings

More information

</translate>

Plasma lader dig personliggøre alle aspekter af dit arbejdsområde.

Plasma-tema

Indstil temaet til skrivebordet

Markører

Indstil musemarkørens udseende

Splashskærm

Skift splashskærm

Plasma vous laisse customiser le thème de votre environnement de travail.

Plasma Theme

Configure the plasma theme.

Thème du pointeur de la souris

Changer l'apparence du curseur de la souris.

Splash Screen

Changer l'écran de démarrage

Модуль для додавання дій, які виконуються у відповідь на проведення пальцем від краю екрана до його центру.

Параметри сенсорного екрана
Параметри сенсорного екрана

Докладніші відомості

The splash screen is the small loading screen occurring just after a successful login. The splash screen is displayed during the time, plasma is loading.

Splash Screen Theme settings windows
Splash Screen Theme settings windows

You can choose to remove it by selecting none, it can decrease the startup time.

Splash Screen Theme store
Splash Screen Theme store

More information

The splash screen is the small loading screen occurring just after a successful login. The splash screen is displayed during the time, plasma is loading.

Splash Screen Theme settings windows
Splash Screen Theme settings windows

You can choose to remove it by selecting none, it can decrease the startup time.

Splash Screen Theme store
Splash Screen Theme store

Plus d'information

Splashskærmen er en lille skærm, som vises lige efter en succesfuldt login. Splashskærmen vises under den tid det tager at indslæse systemet. \

Splashskærmstema indstillingsvindue
Splashskærmstema indstillingsvindue

Du har mulighed for at fjerne denne skærm ved at vælge Ingen; dette kan mindste opstartstiden.

Splashskærmstema Store
Splashskærmstema Store

Mere information

This module configures when to lock your screen and define the appearance of the screen locker.

Screen Locking settings
Screen Locking settings

The lock screen is a security feature. After some time of inactivity, plasma doesn't let anybody access your computer without your password. But this feature isn't bulletproof, for example, if your computer is stolen, the screen locker can't protect your precious file. If you want more security, you should consider an encrypted hard drive.

More information

This module configures when to lock your screen and define the appearance of the screen locker.

Screen Locking settings
Screen Locking settings

The lock screen is a security feature. After some time of inactivity, plasma doesn't let anybody access your computer without your password. But this feature isn't bulletproof, for example, if your computer is stolen, the screen locker can't protect your precious file. If you want more security, you should consider an encrypted hard drive.

Plus d'information

Dette modul indstiller hvornår din skærm skal låses og bestemmer udseendet af skærmlåsen.

Indstillinger for skærmlås
Indstillinger for skærmlås

Skærmlåsen er en sikkerhedsfunktion. Efter en vis tids inaktivitet vil Plasma ikke lade nogen tilgå din computer uden en adgangskode. Men denne funktion er ikke skudsikker: Hvis for eksempel din computer bliver stjålet kan skærmlåsen ikke beskytte dine dyrebare filer. Hvis du ønsker højere sikkerhed skulle du overveje en krypteret harddisk.

Mere information

Плазма надає вам змогу повністю налаштувати тему вашого робочого простору.

Тема Плазми

Налаштовування теми Плазми.

Вказівники

Внесення змін до вигляду вказівника миші.

Вікно вітання

Внесення змін до параметрів вікна вітання.
Configuration of your monitor
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.


Size & Orientation

Here you can configure the physical characteristics of your screen.

Screen Saver

Here you can configure your screen saver.

Gamma

Here you can tweak the way your monitor displays colors. See the Handbook for more details.

Multiple Monitors

<translate> Plasma let you fully customize your workspace theme. </translate>

Plasma Theme</translate>

[[Image:<translate>

Preferences-desktop-plasma-theme.png|48px|link=Special:myLanguage/System Settings/Plasma Theme]]||<translate> Configure the plasma theme. </translate>

Cursors</translate>

[[Image:<translate>

Preferences-cursor.png|48px|link=Special:myLanguage/System Settings/Mouse Cursor Theme]]||<translate> Change the look of the mouse cursor. </translate>

<translate> Splash Screen</translate>

<translate>

Change the splash screen. </translate>

<translate> </translate>

<translate> The splash screen is the small loading screen occurring just after a successful login. The splash screen is displayed during the time, plasma is loading.

Splash Screen Theme settings windows
Splash Screen Theme settings windows

You can choose to remove it by selecting none, it can decrease the startup time.

Splash Screen Theme store
Splash Screen Theme store

More information

</translate>

<translate> This module configures when to lock your screen and define the appearance of the screen locker.

Screen Locking settings
Screen Locking settings

The lock screen is a security feature. After some time of inactivity, plasma doesn't let anybody access your computer without your password. But this feature isn't bulletproof, for example, if your computer is stolen, the screen locker can't protect your precious file. If you want more security, you should consider an encrypted hard drive.

More information

</translate>

I modulet Skærmkanter kan du vælge nogle handlinger, som kan udløses når musen flyttes til en af skærmens kanter eller hjærner. Hver kant og hvert hjørne kan tilknyttes sin egen handling. Du kan bestemme om du ønsker, at vinduer skal maksimeres når du trækker dem til skærmens øverste kant eller om de skal fliselægges, når du trækker dem til skærmens sider. Endelig kan du se hvad der sker, når du trækker dem ud over skærmkanten.

Systemindstillinger skærmkant
Systemindstillinger skærmkant

Mere information

In the Screen Edges module you can choose between certain actions to be triggered when the mouse moves to one of the edges or corners of the screen. Each edge, and each corner can have its own action attached. You can also decide whether you want windows to be maximized when you drag them to the top edge of the screen, or to be tiled when you drag them to the sides of the screen. Finally you can set what happens to windows when you drag them across the screen edge.

System settings screen edge
System settings screen edge

More information

In the Screen Edges module you can choose between certain actions to be triggered when the mouse moves to one of the edges or corners of the screen. Each edge, and each corner can have its own action attached. You can also decide whether you want windows to be maximized when you drag them to the top edge of the screen, or to be tiled when you drag them to the sides of the screen. Finally you can set what happens to windows when you drag them across the screen edge.

System settings screen edge
System settings screen edge

Plus d'information

Here you can change your password and the image associated with your user account. You can also edit the personal information that is associated with your account, and you can change the way the password entry field on the login screen behaves.

In order to change your image, you just need to click on the box on the left side of your username, which should contain your current image. A face selection window will pop up. There you can choose between the different images available in the gallery, or click on Load from file... to search for an image file in your computer. Once you have chosen your desired image, press Apply.

User Manager
User Manager

More information

<translate> In the Screen Edges module you can choose between certain actions to be triggered when the mouse moves to one of the edges or corners of the screen. Each edge, and each corner can have its own action attached. You can also decide whether you want windows to be maximized when you drag them to the top edge of the screen, or to be tiled when you drag them to the sides of the screen. Finally you can set what happens to windows when you drag them across the screen edge.

System settings screen edge
System settings screen edge

More information

</translate>

Arbejdsområde

Indstil arbejdsområdets opførsel

Skrivebordseffekter

Indstil all KWin's skrivebordseffekter

Skærmkanter

Indstil de handlinger der udløses, når du fører musemarkøren ud til skærmens kant.

Touchskærm

Indstil hvilke handlinger, der skal udløses, når du swiper.

Skærmlås

Indstil skærmlåsen

Virtuelle skriveborde

Indstil de virtuelle skrivebordes egenskaber.

Aktiviteter

Indstil aktiviteter

Workspace

Configure the workspace behavior

Desktop Effects

Configure all desktop effects done by KWin

Screen Edges

Configure actions to trigger when pushing the mouse cursor on the screen edge.

Touch Screen

Configure action to trigger when using swipe gestures.

Screen Locking

Configure the lock screen

Virtual Desktops

Configure the properties of virtual desktops.

Activities

Configure activities

<translate>

Here you can change your password and the image associated with your user account. You can also edit the personal information that is associated with your account, and you can change the way the password entry field on the login screen behaves.

In order to change your image, you just need to click on the box on the left side of your username, which should contain your current image. A face selection window will pop up. There you can choose between the different images available in the gallery, or click on Load from file... to search for an image file in your computer. Once you have chosen your desired image, press Apply.

User Manager
User Manager

More information

</translate>

Вікно вітання — невеличке вікно під час завантаження, яке система показує після успішного входу. Вікно вітання буде показано протягом самого завантаження Плазми.

Вікно теми вікна вітання
Вікно теми вікна вітання

Ви можете вимкнути вікно вітання, вибравши варіант «Немає». Такий вибір може дещо зменшити час запуску робочого середовища.

Сховище тем вікон вітання
Сховище тем вікон вітання

Докладніші відомості

За допомогою цього модуля можна визначити умови блокування екрана комп'ютера та вигляд екрана блокування.

Параметри блокування екрана
Параметри блокування екрана

Блокування екрана є можливістю, яка захищає систему. Після певного періоду бездіяльності Плазма забороняє усім доступ до системи без введення пароля. Звичайно ж, захист не є повним. Наприклад, якщо ваш комп'ютер викрадено, блокування екрана не зможе захистити важливі для вас файли. Якщо ви хочете справжнього захисту, спробуйте скористатися шифруванням даних на диску.

Докладніші відомості

 Power Devil allows you to define your all power settings

Global Settings

Power Devil is configured by accessing System Settings -> Hardware section -> Power Management. The first screen, shown above, allows you to configure the appropriate actions according to power state. You can set the action that system should take after having spent a specific time in each state (e.g. dim display after 10 minutes on battery) or upon an event (e.g. sleep when laptop lid closes).

The Advanced Settings tab is where you set your parameters for battery levels, and also decide what action you want to take place when the battery reaches a critical level. It is also the place where you can configure notifications. Like the case of the majority of KDE applications, you can set a sound or a flag as the way you want to be notified, or nothing at all.

In latest KDE versions, tab Activity Settings has been added. It allows you to configure different power settings per activity.

Power Devil vous permets de configurer toutes vos préférences énergies.

Global Settings

Power Devil is configured by accessing System Settings -> Hardware section -> Power Management. The first screen, shown above, allows you to configure the appropriate actions according to power state. You can set the action that system should take after having spent a specific time in each state (e.g. dim display after 10 minutes on battery) or upon an event (e.g. sleep when laptop lid closes).

The Advanced Settings tab is where you set your parameters for battery levels, and also decide what action you want to take place when the battery reaches a critical level. It is also the place where you can configure notifications. Like the case of the majority of KDE applications, you can set a sound or a flag as the way you want to be notified, or nothing at all.

In latest KDE versions, tab Activity Settings has been added. It allows you to configure different power settings per activity.

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

便利

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Wygoda

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Comodità

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Convenience

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Convenience

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Convenience

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Convenience

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Conveniència

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Conveniência

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

 Power Devil позволяет определить все ваши параметры питания

Глобальные параметры

Power Devil is configured by accessing System Settings -> Hardware section -> Power Management. The first screen, shown above, allows you to configure the appropriate actions according to power state. You can set the action that system should take after having spent a specific time in each state (e.g. dim display after 10 minutes on battery) or upon an event (e.g. sleep when laptop lid closes).

The Advanced Settings tab is where you set your parameters for battery levels, and also decide what action you want to take place when the battery reaches a critical level. It is also the place where you can configure notifications. Like the case of the majority of KDE applications, you can set a sound or a flag as the way you want to be notified, or nothing at all.

In latest KDE versions, tab Activity Settings has been added. It allows you to configure different power settings per activity.

Indstillinger for login-skærmen
Indstillinger for login-skærmen

Dette konfigurationsmodul lader dig indstille login-proceduren. Det kan kun bruges, hvis du bruger SDDM til at håndtere dine login. Heldigvis bliver SDDM brugt af de fleste distributioner, som har en KDE-udgave. Hvis du bruger en anden login-manager og ønsker at skifte til SDDM, så se på din distributions wiki.

Belejlighed

Hvis du ikke ønsker at skulle skrive dit brugernavn og din adgangskode under login, så kan du aktivere tilvalget Auto-login i fanebladet Avanceret, vælge den bruger og det skrivebordsmiljø, som du automatisk vil logge ind til og klikke på Anvend. Husk dog, at enhver, som har fysisk adgang til din computer eller bærbare nu også kan få adgang til alle dine data. Du bør overveje risici før du bruger denne funktion.

Mere information

<translate>

Power Devil allows you to define your all power settings

Global Settings

Power Devil is configured by accessing System Settings -> Hardware section -> Power Management. The first screen, shown above, allows you to configure the appropriate actions according to power state. You can set the action that system should take after having spent a specific time in each state (e.g. dim display after 10 minutes on battery) or upon an event (e.g. sleep when laptop lid closes).

The Advanced Settings tab is where you set your parameters for battery levels, and also decide what action you want to take place when the battery reaches a critical level. It is also the place where you can configure notifications. Like the case of the majority of KDE applications, you can set a sound or a flag as the way you want to be notified, or nothing at all.

In latest KDE versions, tab Activity Settings has been added. It allows you to configure different power settings per activity. </translate>

<translate>

Settings for the login screen
Settings for the login screen

This settings module allows you to configure the login procedure. This setting is only useful if you use SDDM as your login manager. Luckily most of the Linux distribution shipping a KDE edition are using SDDM as a login manager. In case you use an other login manager and want to change to SDDM, refer to your distribution wiki.

Convenience

If you don't want to type your username and password during login, you can check in the tab Advanced the Enable Auto-login box here, then select the user and default desktop environment you want to auto-login with, and hit Apply. Remember, though, that anyone who can physically access your computer or laptop will also have instant access to all your data. You need to make a risk assessment before using this facility.

More Information

</translate>

Settings for the appearance of your workspace
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Window Decorations

Here you can select which window theme you want to use. The window theme affects how window title bars and window edges look like as well as the buttons in the titleline. You can fine tune the chosen theme using the Configure Decorations... and Configure Buttons... buttons and the Get New Decorations... button lets you download more themes.

Cursor Theme

Similarly, you can pick the collection of cursors to be used in your workspace, and there is an Install new Theme... button to get more cursor themes.

Desktop Theme

In the Theme tab you select which desktop theme you want to use, and there is a Get New Themes... button to download new themes.

In the Details tab you can tweak the appearance of individual elements of your desktop theme.

Splash Screen

Here you choose which splash screen to use. The splash screen is the screen you see while your machine starts up.

За допомогою модуля «Краї екрана» ви зможете вибрати дії, які виконуватимуться системою, коли ви наводитимете вказівник миші на краї або кути екрана. Із кожним краєм або кутом можна пов'язати власну дію. Крім того, ви можете визначити, чи буде максимізовано вікна, які ви підтягуватимете до верхнього краю екрана, або наказати системі створювати мозаїку з вікон, якщо ви підтягуватимете вікна до країв екрана. Нарешті, ви можете визначити, які дії буде виконано, якщо вікно буде перетягнуто за межу екрана.

Модуль «Краї екрана» Системних параметрів
Модуль «Краї екрана» Системних параметрів

Докладніші відомості

 Settings for the appearance of your workspace
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Window Decorations

Here you can select which window theme you want to use. The window theme affects how window title bars and window edges look like as well as the buttons in the titleline. You can fine tune the chosen theme using the Configure Decorations... and Configure Buttons... buttons and the Get New Decorations... button lets you download more themes.

Cursor Theme

Similarly, you can pick the collection of cursors to be used in your workspace, and there is an Install new Theme... button to get more cursor themes.

Desktop Theme

In the Theme tab you select which desktop theme you want to use, and there is a Get New Themes... button to download new themes.

In the Details tab you can tweak the appearance of individual elements of your desktop theme.

Splash Screen

Here you choose which splash screen to use. The splash screen is the screen you see while your machine starts up.

Workspace</translate>

[[Image:<translate>

Plasma.png|48px|link=Special:myLanguage/System Settings/Workspace]]||<translate> Configure the workspace behavior </translate>

Desktop Effects</translate>

[[Image:<translate>

Preferences-desktop-effects.png|48px|link=Special:myLanguage/System Settings/Desktop Effects]]||<translate> Configure all desktop effects done by KWin </translate>

Screen Edges</translate>

[[Image:<translate>

Preferences-desktop-gestures-screenedges.png|48px|link=Special:myLanguage/System Settings/Screen Edges]]||<translate> Configure actions to trigger when pushing the mouse cursor on the screen edge. </translate>

Touch Screen</translate>

[[Image:<translate>

Preferences-desktop-gestures-touch.png|48px|link=Special:myLanguage/System Settings/Touch Screen]]||<translate> Configure action to trigger when using swipe gestures. </translate>

Screen Locking</translate>

[[Image:<translate>

Preferences-desktop-user-password.png|48px|link=Special:myLanguage/System Settings/Screen Locking]]||<translate> Configure the lock screen </translate>

Virtual Desktops</translate>

[[Image:<translate>

Preferences-desktop-virtual.png|48px|link=Special:myLanguage/System Settings/Virtual Desktops]]||<translate> Configure the properties of virtual desktops. </translate>

Activities</translate>

[[Image:<translate>

Preferences-desktop-activities.png|48px|link=Special:myLanguage/System Settings/Activities]]||<translate> Configure activities </translate>

<translate> </translate>

<translate>

Settings for the appearance of your workspace
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Window Decorations

Here you can select which window theme you want to use. The window theme affects how window title bars and window edges look like as well as the buttons in the titleline. You can fine tune the chosen theme using the Configure Decorations... and Configure Buttons... buttons and the Get New Decorations... button lets you download more themes.

Cursor Theme

Similarly, you can pick the collection of cursors to be used in your workspace, and there is an Install new Theme... button to get more cursor themes.

Desktop Theme

In the Theme tab you select which desktop theme you want to use, and there is a Get New Themes... button to download new themes.

In the Details tab you can tweak the appearance of individual elements of your desktop theme.

Splash Screen

Here you choose which splash screen to use. The splash screen is the screen you see while your machine starts up. </translate>

The appearance section contains all the settings for customizing the theme of Plasma and the applications.

Application Style

Widgets are the interface elements such as buttons, scroll bars, tabs and so on. Here you can choose and configure the widget style used for all KDE applications. You can also fine tune widget behaviour.

Global Theme

Customize Plasma in one click.

Color

Here you can choose which color scheme to use on the desktop and in applications. You can also tweak the settings for individual elements.

Windows Decorations

This module allows you to select a style for the buttons and borders around windows.

Fonts

Configure the font used by your system.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Cursors

Change the look of the mouse cursor.

Font Management

Manage the fonts installed on your computer.

Splash Screen

Change the splash screen.
Réglages pour l'écran de connexion
Réglages pour l'écran de connexion

Ce module de configuration vous permet de configurer la procédure de connexion. Cela est nécessaire seulement, si vous utilisez SDDM comme gestionnaire de votre session. Heureusement la plupart des distributions Linux qui embarquent une version de KDE utilisent SDDM comme gestionnaire de connexion. Si vous utilisez un autre gestionnaire de connexion, et que vous voulez passer à SDDM, voyez le wiki de votre distribution.

Commodités

Si vous ne souhaitez pas indiquer votre identifiants et mot de passe lors de votre connexion, vous pouvez cocher dans l'onglet Avancé la case Activer la connexion automatique. Puis sélectionner l'utilisateur et l'environnemnt de bureau avec lequel vous souhaitez vous connecter automatiquement et cliquez sur Appliquer. Cependant, n'oubliez pas que n'importe pouvant accéder physiquement à votre ordinateur de bureau ou à votre portable, aura également accès à l'ensemble de vos données. Vous devez donc faire une évaluation des risques avant d'utiliser cette option.

Informations supplémentaires

Робочий простір

Модуль для налаштовування поведінки робочого простору

Ефекти стільниці

Модуль для налаштовування усіх ефектів стільниці, роботу яких забезпечує KWin

Краї екрана

Модуль для налаштовування дій, які виконуватимуться при наведенні вказівника миші на край екрана.

Сенсорна панель

Модуль налаштовування дій, які виконуватимуться у відповідь на торкання сенсорної панелію

Блокування екрана

Модуль для налаштовування блокування екрана

Віртуальні стільниці

Налаштовування властивостей віртуальних стільниць.

Простори дій

Модуль для налаштовування просторів дій
Configuring your workspace
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Virtual Desktops

Having many windows open in your workspace can be confusing. Virtual desktops gives you a way to separate tasks and keep the clutter of windows to a minimum. In the Virtual Desktops module you can configure your virtual desktops. In the Desktops tab you can set the number of virtual desktops you want, and you can give them individual names. The Switching tab holds settings for switching between virtual desktops: In the Animation dropdown list you decide how the transition from one virtual desktop to another looks. You can also configure shortcuts to shuffle through virtual desktops, or to go to a particular desktop.

Screen Edges

In the Screen Edges module you can choose between certain actions to be triggered when the mouse moves to one of the edges or corners of the screen. Each edge, and each corner can have its own action attached. You can also decide whether you want windows to be maximized when you drag them to the top edge of the screen, or to be tiled when you drag them to the sides of the screen. Finally you can set what happens to windows when you drag them across the screen edge.

Workspace

In the Workspace module you can choose what type of workspace you want: a conventional desktop or a netbook-friendly one. You can also decide whether you want the Dashboard to display the same widgets as the desktop, or if it should have it own independent set of widgets.

Configuring your workspace
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Virtual Desktops

Having many windows open in your workspace can be confusing. Virtual desktops gives you a way to separate tasks and keep the clutter of windows to a minimum. In the Virtual Desktops module you can configure your virtual desktops. In the Desktops tab you can set the number of virtual desktops you want, and you can give them individual names. The Switching tab holds settings for switching between virtual desktops: In the Animation dropdown list you decide how the transition from one virtual desktop to another looks. You can also configure shortcuts to shuffle through virtual desktops, or to go to a particular desktop.

Screen Edges

In the Screen Edges module you can choose between certain actions to be triggered when the mouse moves to one of the edges or corners of the screen. Each edge, and each corner can have its own action attached. You can also decide whether you want windows to be maximized when you drag them to the top edge of the screen, or to be tiled when you drag them to the sides of the screen. Finally you can set what happens to windows when you drag them across the screen edge.

Workspace

In the Workspace module you can choose what type of workspace you want: a conventional desktop or a netbook-friendly one. You can also decide whether you want the Dashboard to display the same widgets as the desktop, or if it should have it own independent set of widgets.

The appearance section contains all the settings for customizing the theme of Plasma and the applications.

Apparence des applications

Les widgets sont les éléments de l'interface tels que les boutons, les barres de défilement, les onglets, etc. Ici, vous pouvez choisir et configurer le style de widget utilisé par toutes les applications. Vous pouvez également régler le comportement des widgets.

Thème global

Customiser Plasma en un seul clic.

Couleur

Ici, vous pouvez choisir le schéma de couleurs à utiliser sur le bureau et dans les applications. Vous pouvez également modifier les paramètres de chaque élément.

Décorations des fenêtres

Ce module vous permet de sélectionner un style pour les boutons et les décoration autour des fenêtres.

Polices

Configurer la polices utiliser par votre système.

Icônes du thème

Ici vous pouvez choisir quel thème des icônes, vous voulez utiliser pour votre environnement de travail et quel taille utiliser pour les icônes.

Thème du pointeur de la souris

Changer l'apparence du curseur de la souris.

Gestion des polices

Gérez les polices de caractères installées sur votre ordinateur.

Splash screen

Changer l'écran de démarrage

<translate>

Configuring your workspace
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Virtual Desktops

Having many windows open in your workspace can be confusing. Virtual desktops gives you a way to separate tasks and keep the clutter of windows to a minimum. In the Virtual Desktops module you can configure your virtual desktops. In the Desktops tab you can set the number of virtual desktops you want, and you can give them individual names. The Switching tab holds settings for switching between virtual desktops: In the Animation dropdown list you decide how the transition from one virtual desktop to another looks. You can also configure shortcuts to shuffle through virtual desktops, or to go to a particular desktop.

Screen Edges

In the Screen Edges module you can choose between certain actions to be triggered when the mouse moves to one of the edges or corners of the screen. Each edge, and each corner can have its own action attached. You can also decide whether you want windows to be maximized when you drag them to the top edge of the screen, or to be tiled when you drag them to the sides of the screen. Finally you can set what happens to windows when you drag them across the screen edge.

Workspace

In the Workspace module you can choose what type of workspace you want: a conventional desktop or a netbook-friendly one. You can also decide whether you want the Dashboard to display the same widgets as the desktop, or if it should have it own independent set of widgets. </translate>

Параметри вікна входу
Параметри вікна входу

За допомогою цього модуля ви можете налаштувати процедуру входу до системи. Модуль діятиме лише, якщо входом до системи керує SDDM. На щастя, у більшості дистрибутивів Linux, до складу яких входить KDE, як засіб керування входом до системи використовується SDDM. Якщо у вашій системі використовується інший засіб керування входом, і ви захочете змінити його на SDDM, зверніться до вікі вашого дистрибутива.

Зручність

Якщо ви не хочете вказувати ім’я користувача і пароль під час входу до системи, ви можете позначити на вкладці Додатково пункт Дозволити автоматичну реєстрацію, потім вибрати користувача і натиснути кнопку Застосувати. Слід пам’ятати, що у такому разі будь-хто, хто може отримати фізичний доступ до комп’ютера або ноутбука негайно отримає доступ до ваших даних. Вам слід зважити на це, коли вимикатимете реєстрацію.

Докладніші відомості

The appearance section contains all the settings for customizing the theme of Plasma and the applications.

Application Style</translate>

[[Image:<translate>

Preferences-desktop-theme.png|48px|link=Special:myLanguage/System Settings/Application Style]]||<translate> Widgets are the interface elements such as buttons, scroll bars, tabs and so on. Here you can choose and configure the widget style used for all applications. You can also fine tune widget behaviour. </translate>

Global Theme</translate>

[[Image:<translate>

Preferences-desktop-theme-global.png|48px|link=Special:myLanguage/System Settings/Look And Feel]]||<translate> Customize Plasma in one click.</translate>

Color </translate>

[[Image:<translate>

Preferences-desktop-color.png|48px|link=Special:myLanguage/System Settings/Color]]||<translate> Here you can choose which color scheme to use on the desktop and in applications. You can also tweak the settings for individual elements. </translate>

Windows Decorations</translate>

[[Image:<translate>

Preferences-system-windows.png|48px|link=Special:myLanguage/System Settings/Windows Decorations]]||<translate> This module allows you to select a style for the buttons and borders around windows. </translate>

Fonts</translate>

[[Image:<translate>

Preferences-desktop-fonts.png|48px|link=Special:myLanguage/System Settings/Font]]||<translate> Configure the font used by your system. </translate>

Icons</translate>

[[Image:<translate>

Preferences-desktop-icons.png|48px|link=Special:myLanguage/System Settings/Icons]]||<translate> Here you can choose which icon theme to use for your workspace, and how large you want them to be. </translate>

Cursors</translate>

[[Image:<translate>

Preferences-cursor.png|48px|link=Special:myLanguage/System Settings/Mouse Cursor Theme]]||<translate> Change the look of the mouse cursor. </translate>

Font Management</translate>

[[Image:<translate>

Preferences-desktop-fonts-management.png|48px|link=Special:myLanguage/System Settings/Font Management]]||<translate> Manage the fonts installed on your computer. </translate>

<translate> Splash Screen</translate>

<translate>

Change the splash screen. </translate>

<translate> </translate>

The appearance section contains all the settings for customizing the theme of Plasma and the applications.

Стиль програм

Віджети — це елементи інтерфейсу, зокрема кнопки, смужки гортання, вкладки тощо. За допомогою цієї сторінки ви може налаштувати стиль віджетів для всіх програм. Також можна виконати точне налаштування поведінки віджетів.

Загальна тема

Налаштування Плазми у одне клацання.

Колір

Тут ви можете вибрати схему кольорів для стільниці і вікон ваших програм. Ви можете внести зміни до параметрів окремих елементів вигляду.

Обрамлення вікон

За допомогою цього модуля ви можете вибрати стиль кнопок і рамок навколо вікон.

Шрифти

Налаштуйте шрифт, який буде використано в інтерфейсі вашої системи.

Піктограми

Тут ви можете визначитися з набором піктограм для вашого робочого простору та їхніми розмірами.

Вказівники

Змініть вигляд вказівника миші.

Керування шрифтами

Керуйте шрифтами, які встановлено у вашій системі.

Вікно вітання

Змініть вікно вітання.

General Information

Task Scheduler is a graphical front end to the standard "cron" utility. With it, commands (or "tasks") can be run at specific times, on a certain day or date, or at specific intervals (time between execution).

Task Scheduler in Plasma 5

Usage

Task Scheduler can be started by starting the System Settings application. Select Startup and Shutdown follwed by Task Scheduler.

Adding and Modifying tasks

  • Click New Task... to add a new task, or "Modify" to modify an existing task. The Add or modify existing task page will be displayed.
The "Add or modify task" page of SystemSettings
  • Enter the command to be run. Click the folder icon to choose it from a dialog.
  • Enter a comment (optional). This should be descriptive, explaining what the task will do as the command may not always be obvious.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.
    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

Hints

  • All the files that are modified are located in the /etc/cron directory where there are numerous files to look at.
  • The command-line tool that allows you to have a look at the currently installed cron-jobs is 
    crontab -l
    (that's the letter L).

More Information


Printer Configuration

Use this tool to connect your computer to a printer and set up appropriate options

Feature List

  • Add a printer to your computer
  • Give each printer a name that helps identify it
  • Perform printer tests and maintenance
  • Remove a printer


Note
USB printers plugged directly into the computer will probably be automatically recognized and installed by a KDE utility that does the configuration. Even if you disconnect a USB printer, it will remain listed in the printer configuration list.


When a printer is not attached directly to your computer with a USB cable, you will need to use the Printer Configuration utility to add the printer, such as when another computer has shared a printer, or you want to connect directly to a printer that is networked with a print server.

Example

Follow these example steps to add a network connected printer to your computer. First, gather your printer information before you begin (make, model, IP number, etc).

Getting to the program is a sequence of straightforward steps.

  • KDE Kickoff -> Computer -> System Settings -> Printer Configuration
  • Once you get to the Printer Configuration tool, click the button to add a printer (Find and click the Forward button between steps.)
  • Your computer will search your local area network for printers that have been shared on other computers or are directly attached to the network.

In this example, I have an HP Laserjet 2100M which is connected directly to my network using a small print server on the printer.

The next illustration also shows that I have another computer sharing two printers on a Toshiba laptop. If I wanted to use either of them, that other computer would need to be on for the printer to work. Remote printers work best if directly connected to the network or are connected to a dedicated print server computer.


  • I choose AppSocket/HP JetDirect which is the choice for my printserver.


  • I enter the IP address number in the Host blank (Currently, the Printer Configuration tool does not identify what that number is, so you will need to ask your network administrator what the IP address is).
  • Choose the manufacturer (Mine is HP)
  • Choose the model (HP has many)
  • Choose the recommended Driver unless you have a reason to do otherwise.
  • Give the printer a useful name since "printer" may not be good enough.
  • Give a description including the physical location if not in your own room.
  • The "Location" defaults to your computer's name in case you decide to share it later. Sharing is one of the options of the printer configuration tool.

On the configuration screen, you will now see a new "Local Printer" because the printer is "attached" to your computer. If you have more than one printer, you should be sure to thoughtfully select one as the default. You might not want to set the big high-speed departmental printer/copier in the department manager's office as your default if you have a small printer hooked directly to your computer.

Tip
It is always wise to print a test page from the printer configuration tool.

常规信息

KCron是个定期在后台运行程序的工具。他是Cron命令的图形界面。

KCron是个标准的KDE工作区应用程序。

Task Scheduler is a graphical front end to the standard "cron" utility. With it, commands (or "tasks") can be run at specific times, on a certain day or date, or at specific intervals (time between execution).

Task Scheduler in Plasma 5

用法

到了KDE 4.4 中KCron 是系统设定-> 高阶-> 系统 -> 任务调度 的模组。如果没找到，请检查是否已安装kdeadmin 包。 KDE 4.5 中是在 系统设定-> 系统管理员-> 任务调度 。一些发行版将 KCron单独弄成一个包，所以你得自己找找。

Adding and Modifying tasks

  • Click New Task... to add a new task, or "Modify" to modify an existing task. The Add or modify existing task page will be displayed.
The "Add or modify task" page of SystemSettings
  • Enter the command to be run. Click the folder icon to choose it from a dialog.
  • Enter a comment (optional). This should be descriptive, explaining what the task will do as the command may not always be obvious.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.
    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

提示

  • 全部修改的文件都位于拥有许多文件的/etc/cron目录。
  • 查看现在安装好的cron任务的命令行工具是
    crontab -l
    （小写的字母L）

More Information

Information générale

Planificateur de tâches est une interface graphique pour l'outil standard "cron". Avec lui, des commandes (où tâches) peuvent être exécuté à une date spécifique, ou selon un intervalle défini (temps entre les exécutions).

Planificateur de tâches dans Plasma 5

Usage

Le planificateur de tâches peut être démarré, en démarrant l'application Configuration du système. Sélectionner Démarrage et arrêt suivie par Planificateur de tâches.

Ajouter et modifier une tâches

  • Cliquer sur "Nouvelle tâches..." pour ajouter une nouvelle taches, ou "Modifier..." pour modifier une tâche existante. La page Ajouter ou modifier une tâche planifiée va être affichée.
La page"Ajouter ou modifier une tâche planifiée" de configuration du système
  • Entrer une commande qui va être exécutée. Cliquer sur un dossier pour le choisir depuis une fenêtre de dialogue.
  • Entrer un commentaire (optionnel). Il est préférable que le commentaire soit descriptif, expliquant ce que la tâche va faire. En effet, il peut être difficile de comprendre la tâche avec seulement la commande.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.
    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

Astuces

  • All the files that are modified are located in the /etc/cron directory where there are numerous files to look at.
  • The command-line tool that allows you to have a look at the currently installed cron-jobs is 
    crontab -l
    (that's the letter L).

Plus d'information

一般資訊

KCron是個定期在後台運行程式的工具。他是Cron指令的圖形界面。KCron是個標準的KDE工作區應用程式。

Task Scheduler is a graphical front end to the standard "cron" utility. With it, commands (or "tasks") can be run at specific times, on a certain day or date, or at specific intervals (time between execution).

Task Scheduler in Plasma 5

用法

到了 4.4 中 KCron 是系統設定 -> 高階 -> 系統 -> 任務調度的模組。如果沒找到，請檢查是否已安裝kdeadmin 包。 KDE 4.5 中是在系統設定 -> 系統管理員 -> 任務調度。一些發行版將 KCron單獨弄成一個包，所以你得自己找找。

Adding and Modifying tasks

  • Click New Task... to add a new task, or "Modify" to modify an existing task. The Add or modify existing task page will be displayed.
The "Add or modify task" page of SystemSettings
  • Enter the command to be run. Click the folder icon to choose it from a dialog.
  • Enter a comment (optional). This should be descriptive, explaining what the task will do as the command may not always be obvious.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.
    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

提示

  • 全部修改的檔案都位於擁有許多檔案的/etc/cron目錄。
  • 查看現在安裝好的cron任務的命令列工具是
    crontab -l
    （小寫的字母L）

More Information

Generel information

Opgaveskemalæggeren en brugerflade til det almindelige "cron"-program. Med dette kan kommandoer (eller "opgaver") blive kørt på faste tidspunkter, på en given ugedag eller dato eller med et givet interval.

Opgaveskemalæggeren i Plasma 5

Brug

Opgaveskemalæggeren kan startes fra programmet Systemindstillinger. Vælg Opstart og nedlukning og så Opgaveskemalægger.

Tilføjning og ændring af opgaver

  • Klik Ny opgave... for at tilføje en ny opgave eller Ændr for at ændre en eksisterende opgave. Nu vises vinduet Tilføj eller ændr en skemalagt opgave.
"Tilføj eller ændr en skemalagt opgave" vinduet i Systeminsdtillinger
  • Skriv den kommando, der skal køres eller klik på mappeikonet for at vælge det fra en dialog.
  • Skriv en kommentar (valgfrit). Den bør være forklare, hvad opgaven vil gøre, da kommandoen ikke altid er indlysende.
  • Klik Aktivér denne opgave for at køre opgaven klar til at blive kørt.
  • Klik Kør ved systemboot hvis du vil have scriptet til at køre hver gang systemet bootes.
  • Klik Kør hver dag for at få scriptet til at blive kørt hver dag. Dette vil automatisk sørge for, at de rette tilvalg indstilles.
  • Ved hjælp af knapperne kan du vælge hvornår kommandoen skal køres. Du behøver ikke at vælge noget i hver gruppe; de der ikke er nødvendige kan forblive urørte.
    • Timer og Minutter angiver tider på dagen, hvor opgaven køres, ikke et interval.
  • Nåe du er færdig klikker du på OK. Opgaven bliver nu tilføjer og skemalagt, hvis den er aktiveret.
Tip
Klik Kør nu for at køre opgaven med det samme efter at den er blevet tilføjet.


Fjern en opgave

For at fjerne en opgave helt vælger du den i listen og klikker på knappen Slet. Dette vil fjerne opgaven permanent.

Miljøvariabler

Nogle gange har en eller flere opgaver bruge for nogel særlige variabler; disse skal tilføjes i afsnittet Miljøvariabler. Programmet cron bruger sine egne miljøvariabler, variabler for hele systemet og brugerspecifikke variabler anvendes ikke. Klik på Ny variabel... for at tilføje en ny variabledefinition eller på Ændr... for at ændre en eksisterende variabel.

  • Værdien som variablen indeholder. Dette kan være et tal eller en tekststreng.
  • Skriv en kort beskrivelse af variablen.

Tips

  • Alle de filer, som modificeres findes i mappen /etc/cron, hvor der er mange filer, som kan bruges som eksempler.
  • Kommandolinje-værktøjet til at se det aktuelt installerede cron-job er 
    crontab -l
    (det er bogstavet L).

Mere information


Configuration de l'imprimante

Utiliser cet outil pour connecter votre ordinateur à une imprimante et configurer des options appropriées

Liste des fonctionnalités

  • Ajouter une imprimante à votre ordinateur
  • Donner un nom approprié à chaque imprimante pour mieux l'identifier
  • Effectue des tests pour l'imprimante ainsi que de la maintenance
  • Enlever une imprimante


Note
Les imprimantes USB connecter directement à votre ordinateur, vont être probablement directement reconnue par un outil de KDE qui s'occupe de la configuration. Même si vous déconnectez l'imprimante USB, elle restera dans la liste des imprimantes configurée.


When a printer is not attached directly to your computer with a USB cable, you will need to use the Printer Configuration utility to add the printer, such as when another computer has shared a printer, or you want to connect directly to a printer that is networked with a print server.

Exemple

Follow these example steps to add a network connected printer to your computer. First, gather your printer information before you begin (make, model, IP number, etc).

Getting to the program is a sequence of straightforward steps.

  • KDE Kickoff -> Computer -> System Settings -> Printer Configuration
  • Once you get to the Printer Configuration tool, click the button to add a printer (Find and click the Forward button between steps.)
  • Your computer will search your local area network for printers that have been shared on other computers or are directly attached to the network.

In this example, I have an HP Laserjet 2100M which is connected directly to my network using a small print server on the printer.

The next illustration also shows that I have another computer sharing two printers on a Toshiba laptop. If I wanted to use either of them, that other computer would need to be on for the printer to work. Remote printers work best if directly connected to the network or are connected to a dedicated print server computer.


  • I choose AppSocket/HP JetDirect which is the choice for my printserver.


  • I enter the IP address number in the Host blank (Currently, the Printer Configuration tool does not identify what that number is, so you will need to ask your network administrator what the IP address is).
  • Choose the manufacturer (Mine is HP)
  • Choose the model (HP has many)
  • Choose the recommended Driver unless you have a reason to do otherwise.
  • Give the printer a useful name since "printer" may not be good enough.
  • Give a description including the physical location if not in your own room.
  • The "Location" defaults to your computer's name in case you decide to share it later. Sharing is one of the options of the printer configuration tool.

On the configuration screen, you will now see a new "Local Printer" because the printer is "attached" to your computer. If you have more than one printer, you should be sure to thoughtfully select one as the default. You might not want to set the big high-speed departmental printer/copier in the department manager's office as your default if you have a small printer hooked directly to your computer.

Tip
It is always wise to print a test page from the printer configuration tool.


<translate>

Printer Configuration

</translate>

<translate>

Use this tool to connect your computer to a printer and set up appropriate options</translate>

<translate>

Feature List

  • Add a printer to your computer
  • Give each printer a name that helps identify it
  • Perform printer tests and maintenance
  • Remove a printer


Note
USB printers plugged directly into the computer will probably be automatically recognized and installed by a KDE utility that does the configuration. Even if you disconnect a USB printer, it will remain listed in the printer configuration list.


When a printer is not attached directly to your computer with a USB cable, you will need to use the Printer Configuration utility to add the printer, such as when another computer has shared a printer, or you want to connect directly to a printer that is networked with a print server.

Example

Follow these example steps to add a network connected printer to your computer. First, gather your printer information before you begin (make, model, IP number, etc).

Getting to the program is a sequence of straightforward steps.

  • KDE Kickoff -> Computer -> System Settings -> Printer Configuration
  • Once you get to the Printer Configuration tool, click the button to add a printer (Find and click the Forward button between steps.)
  • Your computer will search your local area network for printers that have been shared on other computers or are directly attached to the network.

In this example, I have an HP Laserjet 2100M which is connected directly to my network using a small print server on the printer.

The next illustration also shows that I have another computer sharing two printers on a Toshiba laptop. If I wanted to use either of them, that other computer would need to be on for the printer to work. Remote printers work best if directly connected to the network or are connected to a dedicated print server computer.


  • I choose AppSocket/HP JetDirect which is the choice for my printserver.


  • I enter the IP address number in the Host blank (Currently, the Printer Configuration tool does not identify what that number is, so you will need to ask your network administrator what the IP address is).
  • Choose the manufacturer (Mine is HP)
  • Choose the model (HP has many)
  • Choose the recommended Driver unless you have a reason to do otherwise.
  • Give the printer a useful name since "printer" may not be good enough.
  • Give a description including the physical location if not in your own room.
  • The "Location" defaults to your computer's name in case you decide to share it later. Sharing is one of the options of the printer configuration tool.

On the configuration screen, you will now see a new "Local Printer" because the printer is "attached" to your computer. If you have more than one printer, you should be sure to thoughtfully select one as the default. You might not want to set the big high-speed departmental printer/copier in the department manager's office as your default if you have a small printer hooked directly to your computer.

Tip
It is always wise to print a test page from the printer configuration tool.

</translate>

<translate>

General Information

Task Scheduler is a graphical front end to the standard "cron" utility. With it, commands (or "tasks") can be run at specific times, on a certain day or date, or at specific intervals (time between execution).

Task Scheduler in Plasma 5

Usage

Task Scheduler can be started by starting the System Settings application. Select Startup and Shutdown follwed by Task Scheduler.

Adding and Modifying tasks

  • Click New Task... to add a new task, or "Modify" to modify an existing task. The Add or modify existing task page will be displayed.
The "Add or modify task" page of SystemSettings
  • Enter the command to be run. Click the folder icon to choose it from a dialog.
  • Enter a comment (optional). This should be descriptive, explaining what the task will do as the command may not always be obvious.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.</translate>

<translate>

    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • Enter the name of the variable to use. This name:</translate>

<translate>

    • Must consist of letters, digits, and underscore ('_') only</translate>

<translate>

    • Must start with a letter</translate>

<translate>

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

Hints

  • All the files that are modified are located in the /etc/cron directory where there are numerous files to look at.
  • The command-line tool that allows you to have a look at the currently installed cron-jobs is 
    crontab -l
    (that's the letter L).

More Information

</translate>


プリンターの設定

このツールはコンピューターにプリンターを接続し、適切なオプションを設定するためのものです。

特徴一覧

  • コンピューターにプリンターを追加
  • それぞれのプリンターに名前をつける
  • プリンターのテストとメンテナンスを行う
  • プリンターを削除


注
コンピューターに直接接続された USB プリンターは、自動的に認識され、KDE のユーティリティによってインストールが行われるはずです。もし USB プリンターの接続を外しても、プリンターはプリンター設定リストに残ります。


USB ケーブルでコンピューターに直接プリンターが接続されていない場合 (例えば別のコンピューターが共有プリンターを持っている場合や、プリントサーバーに接続されているプリンターに直接接続したい場合など) は、 プリンターの設定 ユーティリティ用いる必要があります。

例

以下の例に沿って、ネットワークに接続されたプリンターをコンピューターに接続しましょう。まず、始める前に、プリンター情報を集めましょう。(型番、モデル、IP アドレスなど)

Getting to the program is a sequence of straightforward steps.

  • KDE Kickoff -> Computer -> System Settings -> Printer Configuration
  • Once you get to the Printer Configuration tool, click the button to add a printer (Find and click the Forward button between steps.)
  • Your computer will search your local area network for printers that have been shared on other computers or are directly attached to the network.

In this example, I have an HP Laserjet 2100M which is connected directly to my network using a small print server on the printer.

The next illustration also shows that I have another computer sharing two printers on a Toshiba laptop. If I wanted to use either of them, that other computer would need to be on for the printer to work. Remote printers work best if directly connected to the network or are connected to a dedicated print server computer.


  • I choose AppSocket/HP JetDirect which is the choice for my printserver.


  • I enter the IP address number in the Host blank (Currently, the Printer Configuration tool does not identify what that number is, so you will need to ask your network administrator what the IP address is).
  • Choose the manufacturer (Mine is HP)
  • Choose the model (HP has many)
  • Choose the recommended Driver unless you have a reason to do otherwise.
  • Give the printer a useful name since "printer" may not be good enough.
  • Give a description including the physical location if not in your own room.
  • The "Location" defaults to your computer's name in case you decide to share it later. Sharing is one of the options of the printer configuration tool.

On the configuration screen, you will now see a new "Local Printer" because the printer is "attached" to your computer. If you have more than one printer, you should be sure to thoughtfully select one as the default. You might not want to set the big high-speed departmental printer/copier in the department manager's office as your default if you have a small printer hooked directly to your computer.

Tip
It is always wise to print a test page from the printer configuration tool.

Informazioni generali

KCron è uno strumento per eseguire automaticamente applicazioni ad intervalli regolari. È un'interfaccia grafica per il comando Cron.

KCron è un'applicazione standard negli ambienti KDE.

Task Scheduler is a graphical front end to the standard "cron" utility. With it, commands (or "tasks") can be run at specific times, on a certain day or date, or at specific intervals (time between execution).

Task Scheduler in Plasma 5

Utilizzo

In KDE 4.4 KCron è un modulo accessibile in Impostazioni di sistema -> Avanzate -> sezione Sistema -> Pianificatore di operazioni. Se non è presente controlla di aver installato il pacchetto kdeadmin. In KDE 4.5 lo troverai in Impostazioni di sistema -> sezione Amministrazione del sistema -> Pianificatore di operazioni. Alcune distro creano un pacchetto separato per KCron, dunque se non lo vedi dovresti cercare questo termine nel tuo repository.

Adding and Modifying tasks

  • Click New Task... to add a new task, or "Modify" to modify an existing task. The Add or modify existing task page will be displayed.
The "Add or modify task" page of SystemSettings
  • Enter the command to be run. Click the folder icon to choose it from a dialog.
  • Enter a comment (optional). This should be descriptive, explaining what the task will do as the command may not always be obvious.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.
    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

Suggerimenti

  • Tutti i file che vengono modificati si trovano nella cartella /etc/cron dove ci sono numerosi file da guardare.
  • Lo strumento a riga di comando che ti permette di vedere i cron-jobs attualmente definiti è 
    crontab -l
    (l'ultima è la lettera L).

More Information

Información general

KCron es una herramienta para ejecutar aplicaciones en segundo plano a intervalos regulares. Es una interfaz gráfica para el comando Cron.

KCron es una aplicación estándar que es preempaquetada con entornos de trabajo de KDE.

Task Scheduler is a graphical front end to the standard "cron" utility. With it, commands (or "tasks") can be run at specific times, on a certain day or date, or at specific intervals (time between execution).

Task Scheduler in Plasma 5

Uso

En En 4.4 KCron es un módulo que puede ser encontrado en Preferencias del sistema -> Avanzado -> sección Sistema -> Planificador de tareas. Si no aparece, por favor comprueba si tienes instalado el paquete kdeadmin. En KDE 4.5 lo encontrarás en Preferencias del sistema -> sección Administración del sistema -> Planificador de tareas. Algunas distribuciones tienen a KCron en un paquete separado, por lo que si no es visible deberías buscarlo en tus repositorios.

Adding and Modifying tasks

  • Click New Task... to add a new task, or "Modify" to modify an existing task. The Add or modify existing task page will be displayed.
The "Add or modify task" page of SystemSettings
  • Enter the command to be run. Click the folder icon to choose it from a dialog.
  • Enter a comment (optional). This should be descriptive, explaining what the task will do as the command may not always be obvious.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.
    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

Sugerencias

  • Todos los archivos que se modifican se encuentran en el directorio /etc/cron donde hay muchos archivos que mirar.
  • La herramienta en línea de comandos que te permite echar un vistazo a los trabajos instalados en cron es 
    crontab -l
    (es una letra L).

More Information

 Settings to improve the desktop experience for disabled persons


Plasma contains accessibility settings for you in order to make your experience easier when using the computer.

Information
If you have desktop effects activated, you will find some options that may also be of interest in the Desktop Effects module of System Settings.


Bell

Accessibility Settings Bell
Accessibility Settings Bell

In the Bell tab you can customize the system bell. The visible bell settings allows you to change their preferences to having a visual notification on the screen. For example, if a document is being edited, and a sticky key is pressed, you can choose between having the document's interface window being color-inverted, or having the entire window screen of the document change to a custom user-selected color.

The Duration slider allows you to select how long the active window will change color in milliseconds. A smaller amount of time will mean there will be a shorter pause in between visible bells, while a larger amount of time means that the visible pause will be longer.

If you find these settings useful, you may also want to have a look at the Application and System Notifications module of System Settings.

If you find it difficult to use the keyboard, the Modifier Keys and Keyboard Filters tabs have options that you may find helpful; and the Activation Gestures has options to use mouse gestures to activate sticky keys or slow keys, if you do not want to use these features all the time.


Modifier Keys

Accessibility settings modifier keys
Accessibility settings modifier keys

There are two panels here, the Sticky Keys and the Locking Keys panel. Sticky keys is a setting to make it easier to enter multiple key shortcuts. For instance, when one wants to capitalize a letter, the Shift key is pressed at the same time as the letter. Sticky Keys allow you to first press Shift, Control, or Alt, and then release it and press another key. This system will interpret it as those keys being simultaneously pressed.

There are 3 Locking Keys on most keyboards. These keys are the Caps Lock, Num Lock, and Scroll Lock keys. In the Modifier Keys tab, you can choose to have a system bell played if these are activated or deactivated.

Keyboard filters

Accessibility settings keyboard filters
Accessibility settings keyboard filters

Slow Keys

Slow Keys allow confirmation that a key has been pressed and entered. The system bell is activated when the time allotted with the slider has passed. For a key to be accepted, it has to be held until the set amount of time. The system bell can be used to indicate when a key press has been made, accepted, rejected, or any combination of the three.

Bounce Keys

The bounce key setting is used to prevent multiple characters appearing in a document as a result of an immediate key press occurring after the first one. If you press a key again in less time that has been set with the slider, the second repeat character won't be made and a system bell might activate.

Even simple settings like slowing the rate of keyboard repeat can be a great help

Under Construction
This is a new page, currently under construction!


Activation Gestures

Accessibility settings activation gestures
Accessibility settings activation gestures

Screen Reader

Accessibility settings screen reader
Accessibility settings screen reader

More information

Основная информация

KCron - инструмент для регулярного выполнения приложений в фоне. Это графический интерфейс к команде Cron.

KCron стандартный инструмент, поставляемый внутри в рабочей среды KDE.

Task Scheduler is a graphical front end to the standard "cron" utility. With it, commands (or "tasks") can be run at specific times, on a certain day or date, or at specific intervals (time between execution).

Task Scheduler in Plasma 5

Использование

В

В версии 4.4 KCron является модулем, который может быть найден в Настройки системы -> Продвинутые -> Система -> Планировщик задач. В случае отсутствия приложения, убедитесь, что установлен пакет kdeadmin. В KDE 4.5, а также в более поздних версиях, находится в Настройки системы -> Раздел Системное администрирование -> Планировщик задач. В некоторых дистрибутивах выделяют KCron в отдельный пакет, поэтому, в случае его отсутствия, осуществите поиск по репозиторию.

Adding and Modifying tasks

  • Click New Task... to add a new task, or "Modify" to modify an existing task. The Add or modify existing task page will be displayed.
The "Add or modify task" page of SystemSettings
  • Enter the command to be run. Click the folder icon to choose it from a dialog.
  • Enter a comment (optional). This should be descriptive, explaining what the task will do as the command may not always be obvious.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.
    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

Подсказки

  • Все модифицированные файлы расположены в папке /etc/cron, где находятся многочисленные файлы в которых придётся посмотреть.
  • Инструмент командной строки, позволяющий посмотреть на текущее установленное задание Cron, является 
    crontab -l
    (это буква L).

More Information

 Indstillinger til at gøre det lettere for handicappede at bruge computeren


Plasmas indstillinger af tilgængelighed gør det muligt for dig at gøre det nemmere for dig at betjene computeren.

Information
Hvis du har aktiveret skrivebordseffekter, så vil du også finde nogle muligheder, der kan være af interesse i Systemindstillingers modul Skrivebordseffekter.


Klokke

Tilgængelighedindstillinger: Klokke
Tilgængelighedindstillinger: Klokke

I fanebladet Klokke kan du tilpasse systemklokken. Med indstillingerne for synlig klokke kan du indstille systemet til at give visuelle bekendtgærelser på skærmen. Hvis du for eksempel redigerer et dokument og en klæbende tast trykkes ned, så kan du vælge mellem at få dokumentets brugerflade vist med inverterede farver og at få hele dokumentets vindue til at skifte til en brugervalgt farve.

Skyderen Varighed lader dig vælge, i hvor lang tid (i milisekunder) det aktive vindue skal ændre farve. Et mindre tidsrum betyder, at der vil være en kortere pause imellem de visuelle signaler, mens et længere tidsrum betyder, at pausen vil være længere

Hvis du finder disse indstillinger nyttige, så kan du måske også få glæde af indstillingerne i Systemindstillingers modul Program- og systembekendtgørelser.

Hvis du har svært ved at bruge tastaturet, så har fanebladene Ændringstaster og Tastaturfiltre indstillingsmuligheder, som måske kan være til hjælp; og fanebladet Aktiveringsgestus giver dig mulighed for at aktivere klæbrige og langsomme taster med en musegestus, hvis du ikke ønsker at bruge disse funktioner hele tiden.


Ændringstaster

Tilgængelighedindstillinger: Ændringstaster
Tilgængelighedindstillinger: Ændringstaster

Her er der to felter, Klæbende taster og Låsetaster. Indstillingerne af klæbende taster gør det lettere at bruge tastekombinationer. Når du for eksempel vil skrive et stort bogstav, så holder du tasten Shift nede samtidig med at du taster bogstavet. Klæbende taster lader dig taste Shift, Ctrl eller Alt først, slippe tasten igen og så trykke en anden tast ned. Systemet vil opfatte det som om tasterne blev trykket ned samtidigt.

Der er tre låsetaster på de fleste tastaturer, Caps Lock, Num Lock og Scroll Lock. I feltet Låsetaster kan du vælge at få en systemklokke afspillet, hvis en af disse aktiveres eller deaktiveres.

Tastaturfiltre

Tilgængelighedindstillinger: Tastaturfiltre
Tilgængelighedindstillinger: Tastaturfiltre

Langsomme taster

Langsomme taster betyder, at du kan få bekræftelse på, at en tast er blevet trykket og indgivet. Systemklokken aktiveres efter at den tid, der er indstillet på skyderen er gået. En tast skal holdes nede i så lang tid for at blive accepteret. Systemklokken kan bruges til at indikere, når tasten trykkes ned, accepteres eller afvises eller en hvilken som helst kombination af disse tre.

Elastiske taster

Indstillingerne af elastiske taster bruges til at forhindre flere tegn i at dukke op i et dokument som resultat af et tastetryk, som kommer umiddelbart efter det første. Hvis du taster igen inden for det tidsrum, som er indstillet på skyderen, så indgives det næste tegn ikke og systemklokken aktiveres eventuelt.

Selv simple indstillinger som at gøre tastaturetgentagelsen langsommere kan være en stor hjælp

Under konstruktion
Dette er en ny side, som er ved at blive færdiggjort!


Aktiveringsgestusser

Tilgængelighedindstillinger: Aktiveringsgestusser
Tilgængelighedindstillinger: Aktiveringsgestusser

Skærmlæser

Tilgængelighedindstillinger: Skærmlæser
Tilgængelighedindstillinger: Skærmlæser

Mere information

<translate>

Settings to improve the desktop experience for disabled persons


Plasma contains accessibility settings for you in order to make your experience easier when using the computer.

Information
If you have desktop effects activated, you will find some options that may also be of interest in the Desktop Effects module of System Settings.


Bell

Accessibility Settings Bell
Accessibility Settings Bell

In the Bell tab you can customize the system bell. The visible bell settings allows you to change their preferences to having a visual notification on the screen. For example, if a document is being edited, and a sticky key is pressed, you can choose between having the document's interface window being color-inverted, or having the entire window screen of the document change to a custom user-selected color.

The Duration slider allows you to select how long the active window will change color in milliseconds. A smaller amount of time will mean there will be a shorter pause in between visible bells, while a larger amount of time means that the visible pause will be longer.

If you find these settings useful, you may also want to have a look at the Application and System Notifications module of System Settings.

If you find it difficult to use the keyboard, the Modifier Keys and Keyboard Filters tabs have options that you may find helpful; and the Activation Gestures has options to use mouse gestures to activate sticky keys or slow keys, if you do not want to use these features all the time.


Modifier Keys

Accessibility settings modifier keys
Accessibility settings modifier keys

There are two panels here, the Sticky Keys and the Locking Keys panel. Sticky keys is a setting to make it easier to enter multiple key shortcuts. For instance, when one wants to capitalize a letter, the Shift key is pressed at the same time as the letter. Sticky Keys allow you to first press Shift, Control, or Alt, and then release it and press another key. This system will interpret it as those keys being simultaneously pressed.

There are 3 Locking Keys on most keyboards. These keys are the Caps Lock, Num Lock, and Scroll Lock keys. In the Modifier Keys tab, you can choose to have a system bell played if these are activated or deactivated.

Keyboard filters

Accessibility settings keyboard filters
Accessibility settings keyboard filters

Slow Keys

Slow Keys allow confirmation that a key has been pressed and entered. The system bell is activated when the time allotted with the slider has passed. For a key to be accepted, it has to be held until the set amount of time. The system bell can be used to indicate when a key press has been made, accepted, rejected, or any combination of the three.

Bounce Keys

The bounce key setting is used to prevent multiple characters appearing in a document as a result of an immediate key press occurring after the first one. If you press a key again in less time that has been set with the slider, the second repeat character won't be made and a system bell might activate.

Even simple settings like slowing the rate of keyboard repeat can be a great help

Under Construction
This is a new page, currently under construction!


Activation Gestures

Accessibility settings activation gestures
Accessibility settings activation gestures

Screen Reader

Accessibility settings screen reader
Accessibility settings screen reader

More information

</translate>

Γενικές πληροφορίες

Το KCron είναι ένα εργαλείο για την εκτέλεση εφαρμογών στο παρασκήνιο ανά τακτά χρονικά διαστήματα. Αποτελεί ένα γραφικό περιβάλλον διεπαφής της εντολής cron.

Το KCron είναι μια πρότυπη εφαρμογή για την οποία δημιουργείται το αντίστοιχο πακέτο προκαταβολικά για τους χώρους εργασίας του KDE.

Task Scheduler is a graphical front end to the standard "cron" utility. With it, commands (or "tasks") can be run at specific times, on a certain day or date, or at specific intervals (time between execution).

Task Scheduler in Plasma 5

Χρήση

Στο KDE 4.4 το KCron είναι ένα άρθρωμα που μπορείτε να το βρείτε στις Ρυθμίσεις συστήματος-> Για προχωρημένους-> Σύστημα -> Προγραμματισμός εργασιών. Αν δεν το βρείτε εκεί, ελέγξτε παρακαλώ αν έχετε εγκαταστήσει το πακέτο kdeadmin. Στο KDE 4.5 καθώς και στις επόμενες εκδόσεις θα το βρείτε στις Ρυθμίσεις συστήματος-> Διαχείριση συστήματος-> Προγραμματισμός εργασιών. Σε μερικές διανομές το KCron αποτελεί ξεχωριστό πακέτο, έτσι, αν δεν το βλέπετε, αναζητήστε το στο αποθετήριο σας.

Adding and Modifying tasks

  • Click New Task... to add a new task, or "Modify" to modify an existing task. The Add or modify existing task page will be displayed.
The "Add or modify task" page of SystemSettings
  • Enter the command to be run. Click the folder icon to choose it from a dialog.
  • Enter a comment (optional). This should be descriptive, explaining what the task will do as the command may not always be obvious.
  • Click Enable this task to enable the task to run.
  • Click Run at system bootup to enable the script to run each time the system is booted.
  • Click Run every day to enable the script to run every day. This will automatically select the appropriate options.
  • Using the buttons, choose when the command should be run. Not all parameters are required, those not needed may be left blank.
    • Hours and Minutes are the time of day to run the task, not an interval.
  • When done, click OK. The task will be added and scheduled if enabled.
Tip
Click Run Now to run a task immediately after adding or modifying the task.


Removing a task

To completely remove a task, select the task from the list and click the Delete button. This will permanently remove the task.

Environment Variables

Sometimes a task or multiple tasks need a specific variable set, it must be added in the Environment Variables section. The cron utility uses its own environment, system-wide and user-specific variables are not used. Click New Variable to add a new variable definition, or Modify to change an existing variable.

  • The value the variable will contain. This can be a number or string.
  • Enter a brief description of the variable.

Υποδείξεις

  • Όλα τα τροποποιημένα αρχεία βρίσκονται στον κατάλογο /etc/cron όπου μπορείτε να βρείτε έναν μεγάλο αριθμό αρχείων.
  • Το εργαλείο της γραμμής εντολών που σας επιτρέπει να παρακολουθήσετε τις τρέχουσες προγραμματισμένες εργασίες του cron είναι το 
    crontab -l
    (το γράμμα είναι το λατινικό L).

More Information

 Impostazioni per migliorare l'esperienza d'uso del desktop per persone diversamente abili


Plasma contains accessibility settings for you in order to make your experience easier when using the computer.

Information
Se hai gli effetti desktop attivati puoi trovare opzioni interessanti anche nel modulo Effetti desktop di Impostazioni di sistema.


Campanella

Accessibility Settings Bell
Accessibility Settings Bell

Nella scheda Campanella puoi configurare la campanella di sistema. Le impostazioni della campanella visiva possono essere configurate per avere un feedback visivo degli eventi. Ad esempio se si sta modificando un documento e viene premuto un tasto modificatore (es Alt) puoi impostare di ricevere una segnalazione mediante l'inversione dei colori della finestra, oppure modificando il colore della finestra ad una valore impostato.

Il cursore Durata ti permette di scegliere quanto a lungo (in millisecondi) deve durare il cambio di colore della finestra. Un intervallo di tempo minore significherà pause più corte tra diverse campanelle, mentre tempi più lunghi prolungheranno la durata della campanella.

Se hai trovato utili queste impostazioni potresti voler consultare anche il modulo Notifiche delle applicazioni e di sistema, sempre in Impostazioni di sistema.

Se hai dei problemi ad utilizzare la tastiera, le schede Tasti modificatori e filtri tastiera hanno opzioni che puoi trovare utili, inoltre la scheda Gesti di attivazione ha opzioni per usare gesti del mouse per attivare tasti permanenti o rallentati, se non vuoi che queste opzioni siano sempre attive.


Tasti modificatori

Accessibility settings modifier keys
Accessibility settings modifier keys

In questa scheda sono presenti due pannelli, Permanenza dei tasti e Tasti di blocco. Le opzioni di permanenza dei tasti favoriscono l'inserimento di scorciatoie multitasto. Ad esempio, per avere una lettera maiuscola è necessario premere Shift più, contemporaneamente, il tasto corrispondente alla lettera. Permanenza dei tasti consente di premere prima Shift, Ctrl o Alt e poi rilasciarli e premere il tasto seguente. Il sistema interpreterà questi ultimi come premuti contemporaneamente ai primi.

Sulla maggior parte delle tastiere sono presenti tre tasti di blocco. Questi sono Caps Lock, Num Lock, e Scroll Lock. Nell'opzione tasti di blocco puoi scegliere di suonare la campanella di sistema quando i tasti di blocco sono attivati o disattivati.

Filtri tastiera

Accessibility settings keyboard filters
Accessibility settings keyboard filters

Rallentamento tasti

Il rallentamento tasti permette di riceve conferme che ogni tasto è stato premuto. La campanella di sistema si attiva ogni volta che passa il tempo indicato dal cursore. Per essere accettato ogni tasto deve essere premuto almeno fino al tempo definito. La campanella può essere quanti usata per indicare quando un tasto viene premuto, accettato, rifiutato o una combinazione di queste tre.

Pressione ravvicinata dei tasti

L'impostazione pressione ravvicinata dei tasti è impiegata per impedire che diversi caratteri compaiano in un documento come prodotto della pressione immediata di diversi tasti successivamente al primo. Se premi un tasto dopo che sia passato un tempo minore a quello indicato dal cursore rispetto al precedente, il secondo carattere non sarà accettato, e, se impostata, verrà suonata la campanella di sistema.

Anche impostazioni semplici come il rallentamento della ripetizione dei tasti per la tastiera possono essere di grande aiuto.

Under Construction
This is a new page, currently under construction!


Activation Gestures

Accessibility settings activation gestures
Accessibility settings activation gestures

Screen Reader

Accessibility settings screen reader
Accessibility settings screen reader

More information

 Arranjament per a millorar l'experiència d'escriptori per a les persones amb discapacitat.


El Plasma conté opcions de configuració d'accessibilitat per a fer la vostra experiència més fàcil quan utilitzeu l'ordinador.

Informació
Si teniu els efectes d'escriptori activats, trobareu algunes opcions que també poden ser d'interès en el mòdul Efectes d'escriptori de Arranjament del sistema.


Timbre

Opcions de configuració d'accessibilitat per al timbre
Opcions de configuració d'accessibilitat per al timbre

A la pestanya Timbre podeu personalitzar el timbre del sistema. La configuració de timbre visible us permet canviar les preferències per tenir una notificació visual a la pantalla. Per exemple, si s'està editant un document, i es prem una tecla apegalosa, podeu triar entre tenir la interfície de la finestra del document amb els colors invertits, o tenir-la canviada a un color personalitzat seleccionat per l'usuari.

El control lliscant Durada us permet seleccionar la durada de la finestra activa en que canviarà de color, en mil·lèsimes de segon. Una menor quantitat de temps significa que hi haurà una pausa més curta entre els timbres visibles, mentre que una major quantitat de temps significa que la pausa visible serà més llarga.

Si trobeu útils aquests ajustaments, és possible que vulgueu fer una ullada al mòdul Notificacions de les aplicacions i del sistema d'Arranjament del sistema.

Si us resulta difícil utilitzar el teclat, les pestanyes Tecles modificadores i Filtres de teclat disposen d'opcions que poden ser-vos útils, i Gestos d'activació disposa d'opcions per utilitzar els gestos del ratolí per activar les tecles apegaloses o les tecles lentes, si no voleu utilitzar aquestes funcions tot el temps.


Tecles modificadores

Opcions de configuració d'accessibilitat per a les tecles modificadores
Opcions de configuració d'accessibilitat per a les tecles modificadores

Aquí hi ha dos plafons, Tecles lentes i Tecles de repetició. Les tecles lentes són un ajustament per a que sigui més fàcil introduir diverses dreceres de teclat. Per exemple, quan es vol utilitzar una lletra majúscula, la tecla Majús. es prem alhora que la lletra. Les tecles lentes us permeten prémer primer Majús., Control, o Alt, i després de deixar-les anar, prémer una altra tecla. Això serà interpretat pel sistema com tecles premudes simultàniament.

A la majoria dels teclats hi ha tres tecles de bloqueig. Aquestes són Bloq Majús, Bloq Núm, i Bloq Despl. A la pestanya Tecles modificadores, podeu triar si tenir un timbre del sistema si s'activen o desactiven aquestes.

Filtres de teclat

Opcions de configuració d'accessibilitat per als filtres de teclat
Opcions de configuració d'accessibilitat per als filtres de teclat

Tecles lentes

Les tecles lentes permeten confirmar que la tecla ha estat premuda i que ha entrat. El timbre del sistema s'activarà quan hagi passat el temps assignat amb el control lliscant. Per a que una tecla sigui acceptada, l'haureu de mantenir durant el temps establert. El timbre del sistema es pot utilitzar per indicar que una tecla es prem, s'ha acceptat, s'ha rebutjat, o qualsevol combinació de les tres.

Tecles de repetició

L'ajustament de la tecla de repetició s'utilitza per prevenir que apareguin múltiples caràcters en un document com a resultat de prémer una tecla immediatament després de la primera. Si premeu una tecla després del temps establert amb el control lliscant, el segon caràcter repetit no es farà i es podrà activar un timbre del sistema.

Fins i tot ajustaments simples com la desacceleració de la taxa de repetició del teclat poden ser-vos de gran ajuda.

En construcció
Aquesta és una pàgina nova, actualment en construcció!


Gestos d'activació

Opcions de configuració d'accessibilitat per als gestos d'activació
Opcions de configuració d'accessibilitat per als gestos d'activació

Lector de pantalla

Opcions de configuració d'accessibilitat per al lector de pantalla
Opcions de configuració d'accessibilitat per al lector de pantalla

Més informació

System Settings

KDE system manager for hardware, software, and workspaces.

機能

  • System manager for global KDE platform settings
  • Customize and manage your desktop in one convenient location
  • Search function helps narrow down probable settings
  • Pointing at an icon displays a tooltip with more information about it

Search

When the keyboard focus is in the icon window, you can type the first few letters of any module name to select it.

System Settings has a search function to help in hunting down a setting. Simply type in a keyword in the Search field in the toolbar and System Settings will display modules that contain the keyword and hide those that don't.

Searching for "key".

You can also search for and open System Settings modules in KRunner.

カテゴリ

Appearance

Look and Feel

Customize Plasma in one click.

Workspace Theme

Customize your plasma theme, cursor theme, and splash theme all from here.

Color

Here you can choose which color scheme to use on the desktop and in applications. You can also tweak the settings for individual elements.

Font

Configure which fonts you want to use in window bars, menus, and elsewhere.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Application Style

Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

Startup and Shutdown

Configure your system behavior when starting up or shutting down.

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

Hardware

Input Devices

Configure your keyboard, mouse and joystick.

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.

System Settings

KDE system manager for hardware, software, and workspaces.

Features

  • System manager for global KDE platform settings
  • Customize and manage your desktop in one convenient location
  • Search function helps narrow down probable settings
  • Pointing at an icon displays a tooltip with more information about it

Search

When the keyboard focus is in the icon window, you can type the first few letters of any module name to select it.

System Settings has a search function to help in hunting down a setting. Simply type in a keyword in the Search field in the toolbar and System Settings will display modules that contain the keyword and hide those that don't.

Searching for "key".

You can also search for and open System Settings modules in KRunner.

Kategorien

Appearance

Look and Feel

Customize Plasma in one click.

Workspace Theme

Customize your plasma theme, cursor theme, and splash theme all from here.

Color

Here you can choose which color scheme to use on the desktop and in applications. You can also tweak the settings for individual elements.

Font

Configure which fonts you want to use in window bars, menus, and elsewhere.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Application Style

Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

Startup and Shutdown

Configure your system behavior when starting up or shutting down.

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

Hardware

Input Devices

Configure your keyboard, mouse and joystick.

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.

System Settings

Okno ustawień KDE

Funkcje

  • Menadżer dla wszystkich ustawień KDE
  • Personalizuj i zarządzaj swoim systemem z jednego miejsca
  • Funkcja wyszukiwania pozwala szybko odszukać dane ustawienie
  • Wskazanie myszą ikony pokazuje opis danego ustawienia

Search

When the keyboard focus is in the icon window, you can type the first few letters of any module name to select it.

System Settings has a search function to help in hunting down a setting. Simply type in a keyword in the Search field in the toolbar and System Settings will display modules that contain the keyword and hide those that don't.

Searching for "key".

You can also search for and open System Settings modules in KRunner.

Kategorie

Appearance

Look and Feel

Customize Plasma in one click.

Workspace Theme

Customize your plasma theme, cursor theme, and splash theme all from here.

Color

Here you can choose which color scheme to use on the desktop and in applications. You can also tweak the settings for individual elements.

Font

Configure which fonts you want to use in window bars, menus, and elsewhere.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Application Style

Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

Startup and Shutdown

Configure your system behavior when starting up or shutting down.

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

Hardware

Input Devices

Configure your keyboard, mouse and joystick.

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.

System Settings

KDE system manager for hardware, software, and workspaces.

Features

  • System manager for global KDE platform settings
  • Customize and manage your desktop in one convenient location
  • Search function helps narrow down probable settings
  • Pointing at an icon displays a tooltip with more information about it

Search

When the keyboard focus is in the icon window, you can type the first few letters of any module name to select it.

System Settings has a search function to help in hunting down a setting. Simply type in a keyword in the Search field in the toolbar and System Settings will display modules that contain the keyword and hide those that don't.

Searching for "key".

You can also search for and open System Settings modules in KRunner.

Categories

Appearance

Look and Feel

Customize Plasma in one click.

Workspace Theme

Customize your plasma theme, cursor theme, and splash theme all from here.

Color

Here you can choose which color scheme to use on the desktop and in applications. You can also tweak the settings for individual elements.

Font

Configure which fonts you want to use in window bars, menus, and elsewhere.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Application Style

Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

Startup and Shutdown

Configure your system behavior when starting up or shutting down.

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

Hardware

Input Devices

Configure your keyboard, mouse and joystick.

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.

System Settings

KDE 軟體和工作空間的控制中心。

特性

  • 全局性的 KDE 平臺配置中心
  • 方便的自定義，管理你的桌面
  • 幫助定位設置模塊的搜索功能

搜索

系統設置 有個搜索功能幫助定位要找的設置模塊位置。在工具欄的搜索框輸入，系統設置會高亮包含關鍵詞的設置模塊，同時黯淡其他無關模塊。還可以透過 KRunner 訪問到系統設定模組。

搜索關鍵詞

You can also search for and open System Settings modules in KRunner.

分類

通用外觀與行為

Look and Feel

Customize Plasma in one click.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Workspace Theme]]

設定你的用戶信息，密碼和路徑。你還可以配置社會化桌面提供方。

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Color]]

設定應用程式風格，顏色，圖示，字型和表情圖示。

Font

Configure which fonts you want to use in window bars, menus, and elsewhere.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Application Style

Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Startup and Shutdown]] 設定啟動或關閉時的系統行為

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

硬體

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Input Devices]] 設定你的鍵盤，滑鼠和搖杆。

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.
Paramètres pour améliorer l'utilisation du bureau pour les personnes déficientes


Plasma contient des paramètres d'accessibilité pour facilter l'utilisation de votre ordinateur.

Information
Si vous avez activé les effets du bureau, vous trouverez quelques options qui peuvent être intéressantes dans le module Effets du bureau de Paramètres système.


Cloche

Accessibilité configurer la cloche
Accessibilité configurer la cloche

Dans l'onglet Cloche vous pouvez personnaliser la cloche du système. Les paramètres visibles de la cloche vous permettent de changer leur préférence pour avoir une notification visuelle sur l'écran. Par exemple, si une document est en cour de modification, et une touche collante a été enfoncée, vous pouvez choisir entre avoir la fenêtre d'interface du document passer en couleurs inversées, ou avoir toute la fenêtre d'écran du document qui se change en couleur définie par l'utilisateur.

Le curseur linéaire Durée vous permet de sélectionner la durée pendant laquelle la fenêtre active changera de couleur en millisecondes. Une valeur plus petite du temps signifie que l'attente sera plus courte entre les cloches visibles, tandis qu'une valeur plus grande de ce temps indique que l'attente sera plus longue.

Si vous trouvez ces paramètres intéressants, vous pourrez également regarder le module Notification des applications et du système de Paramètres système.

Si vous trouvez difficile d'utiliser le clavier, les onglets Touches de modification et Filtres clavier possèdent des options qui vous seront utiles; et les Gestes d'activation des options pour utiliser les gestes à la souris pour activer les touches collantes (sticky keys) ou les touches lentes, si vous ne voulez pas utiliser ces fonctions tout le temps.


Touches de modification

Touches de modification des paramètres d'accessibilité
Touches de modification des paramètres d'accessibilité

Il y a deux panneaux ici, le panneau des touches collantes (Sticky Keys) et celui des Touches de verrouillage. Les touches collantes sont une configuration pour faciliter l'entrée de multiples raccourcis clavier. Par exemple, si on veut mettre une lettre en majuscule, la touche Shift est pressée au même moment que la lettre. Les clés collantes vous autorisent à presser d'abord Shift, Control, ou Alt, et ensuite de les relâcher et de presser une autre touche. Ce système va les interpréter comme si les touches avaient été simultanément pressées.

Il existe trois touches de verouillage sur la plupart des claviers. Ces clés sont les touches Caps Lock, Num Lock, et Scroll Lock . Dans l'onglet touches de modification, vous pouvez choisir d'avoir une cloche système qui retentit si celles-ci sont activées ou désactivées.

Filtres clavier

Filtres clavier des paramètres d'accessibilité
Filtres clavier des paramètres d'accessibilité

Touches lentes

Les touches lentes permettent de confirmer qu'une touche a été pressée et entrée. La cloche système est activée quand le temps alloué avec le curseur linéaire est dépassé. Pour qu'une touche soit acceptée, elle doit être tenue pendant la période de temps définie. La cloche système peut être utilisée pour indiquer qu'une touche a été enfoncée, acceptée, rejetée, ou tout autre combinaison de ces trois cas.

Touches de renvoi

Le paramètre de touche de renvoi est utilisé pour éviter que plusieurs caractères n'apparaissent dans un document à la suite d'une pression immédiate sur une touche après la première. Si vous appuyez à nouveau sur la touche en moins de temps que défini avec le curseur, le deuxième caractère répété ne sera pas créé et une cloche système peut s'activer.

Même une simple initialisation, comme abaisser la vitesse de répétition du clavier, peut être d'une grande aide.

En cours de construction
Il s'agit d'une nouvelle page, actuellement en construction.


Gestes d'activation

Gestes d'activation des paramètres d'accessibitié
Gestes d'activation des paramètres d'accessibitié

Lecteur d'écran

Paramètres d'accessibilité du lecteur d'écran
Paramètres d'accessibilité du lecteur d'écran

Informations supplémentaires

System Settings

Ovládacie centrum pre KDE softvér and pracovné prostredie.

Features

  • System manager for global KDE platform settings
  • Customize and manage your desktop in one convenient location
  • Search function helps narrow down probable settings
  • Pointing at an icon displays a tooltip with more information about it

Search

When the keyboard focus is in the icon window, you can type the first few letters of any module name to select it.

System Settings has a search function to help in hunting down a setting. Simply type in a keyword in the Search field in the toolbar and System Settings will display modules that contain the keyword and hide those that don't.

Searching for "key".

You can also search for and open System Settings modules in KRunner.

Categories

Appearance

Look and Feel

Customize Plasma in one click.

Workspace Theme

Customize your plasma theme, cursor theme, and splash theme all from here.

Color

Here you can choose which color scheme to use on the desktop and in applications. You can also tweak the settings for individual elements.

Font

Configure which fonts you want to use in window bars, menus, and elsewhere.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Application Style

Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

Startup and Shutdown

Configure your system behavior when starting up or shutting down.

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

Hardware

Input Devices

Configure your keyboard, mouse and joystick.

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.
Edit system wide keyboard shortcuts and mouse gestures
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Custom Shortcuts

Here you edit settings for input actions, including mouse gestures.

Standard Keyboard Shortcuts

Here you can configure the keyboard shortcuts for a number of actions common to many applications. This includes actions such as Open, Save, Close, Cut, Copy, Paste, Find, and many more.

Global Keyboard Shortcuts

Global keyboard shortcuts are used to interface with applications that do not display an interface. Settings for such shortcuts are edited here.

Mouse Gestures

Note
This section was written for KDE SC version 4.4.4. In KDE SC version 4.5 and later, the layout and organization of the system settings modules has changed somewhat. However, apart from a little moving around of some dialog elements this section should still be valid


Mouse gestures settings.


The place where you start is System Settings -> Input Actions (in KDE SC 4.5 it is System Settings -> Shortcuts and Gestures -> Custom Shortcuts)

Enabling mouse gestures

In the bottom left corner of the window there is a Settings button. Make sure that the Gestures checkbox is checked. Set the timout as you see fit. The mouse button might be different for you, I chose 3 for using the right mouse button. If you want input actions to be enabled automatically, check the "Start the input Actions daemon on login" above.

Also to have any gestures working you need to have the individual gestures themself enabled.

Creating the Mouse gestures actions group

Right click on the left pane (in an empty area under the list of action groups) and choose New Group, rename that group to "Mouse Gestures" and check the checkbox attached to its name.

Creating a new mouse gesture

From now on I will assume that the new group is called "Mouse Gestures". Right click on Mouse Gestures and choose New -> Mouse Gesture Action (here there are three options but I didn't manage to work with "Send Keyboard Input") using "Command/URL" or "D-Bus Command" you will need to create a gesture and bind an action to it.

To create the gesture

Click on your New Action and select the Trigger tab. in the bottom of the screen there is an Edit button (click it). In the box that just opened draw your gesture using the left mouse button.

To bind an action

if you chose Command/URL simply enter that command/url under the Action tab at the Command/URL field.

Examples using Command/URL

Close window

This command will let you close the next window you mouse click on.

Note
wmctrl may not support your Window Manager.


Command/URL: wmctrl -c :SELECT:

to close the active window 

Command/URL: wmctrl -c :ACTIVE:

Translate clipboard content

This command will display a translation of the current clipboard content.

  • Required for this are:
    • xclip
    • libtranslate
Command/URL: kdialog --title "Translation" --msgbox "`xclip -o | translate -f en -t he -`"

Replace 'en' and 'he' with the desired source and destination language, if you are not sure, a full list of language codes is available from the ISO 639-2 list.

Examples using D-Bus

If you chose D-Bus, here are few examples.

Finding out what to fill where, is done with the help of the "Launch D-Bus Browser", using that browser you can find what method you wish to call in what application object. Using D-Bus we need to fill some fields, the field name will be regular and the content italic.

Runner

This will display the Runner dialog.

Remote Application: org.kde.krunner

Remote Object: /App

Function: org.kde.krunner.App.display

Audacious next/previous/pause/play/stop/repeat track

Remote Application: org.mpris.audacious

Remote Object: /Player

Function: org.freedesktop.MediaPlayer.Next (replace Next with Prev/Pause/Stop/Play/Repeat)

Audacious PlayPause track

If not playing will play, if playing will pause.

Remote Application: org.mpris.audacious

Remote Object: /org/atheme/audacious

Function: org.atheme.audacious.PlayPause

Klipper manually invoke action menu

display the actions pop-up. (I am using that to search and translate words)

Remote Application: org.kde.klipper

Remote Object: /klipper

Function: org.kde.klipper.klipper.showKlipperManuallyInvokeActionMenu

See also

 Edit system wide keyboard shortcuts and mouse gestures
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Custom Shortcuts

Here you edit settings for input actions, including mouse gestures.

Standard Keyboard Shortcuts

Here you can configure the keyboard shortcuts for a number of actions common to many applications. This includes actions such as Open, Save, Close, Cut, Copy, Paste, Find, and many more.

Global Keyboard Shortcuts

Global keyboard shortcuts are used to interface with applications that do not display an interface. Settings for such shortcuts are edited here.

Mouse Gestures

Note
This section was written for KDE SC version 4.4.4. In KDE SC version 4.5 and later, the layout and organization of the system settings modules has changed somewhat. However, apart from a little moving around of some dialog elements this section should still be valid


Mouse gestures settings.


The place where you start is System Settings -> Input Actions (in KDE SC 4.5 it is System Settings -> Shortcuts and Gestures -> Custom Shortcuts)

Mausgesten einschalten

In the bottom left corner of the window there is a Settings button. Make sure that the Gestures checkbox is checked. Set the timout as you see fit. The mouse button might be different for you, I chose 3 for using the right mouse button. If you want input actions to be enabled automatically, check the "Start the input Actions daemon on login" above.

Also to have any gestures working you need to have the individual gestures themself enabled.

Erstellen der Mausgesten Aktionen-Gruppe

Right click on the left pane (in an empty area under the list of action groups) and choose New Group, rename that group to "Mouse Gestures" and check the checkbox attached to its name.

Erstellen einer neuen Mausgeste

From now on I will assume that the new group is called "Mouse Gestures". Right click on Mouse Gestures and choose New -> Mouse Gesture Action (here there are three options but I didn't manage to work with "Send Keyboard Input") using "Command/URL" or "D-Bus Command" you will need to create a gesture and bind an action to it.

Um die Geste zu erstellen

Click on your New Action and select the Trigger tab. in the bottom of the screen there is an Edit button (click it). In the box that just opened draw your gesture using the left mouse button.

Eine Aktion einbinden

if you chose Command/URL simply enter that command/url under the Action tab at the Command/URL field.

Beispiel der Verwendung eines Befehls / Adresse

Fenster schließen

This command will let you close the next window you mouse click on.

Note
wmctrl may not support your Window Manager.


Command/URL: wmctrl -c :SELECT:

to close the active window 

Command/URL: wmctrl -c :ACTIVE:

Inhalt der Zwischenablage übersetzen

This command will display a translation of the current clipboard content.

  • Required for this are:
    • xclip
    • libtranslate
Command/URL: kdialog --title "Translation" --msgbox "`xclip -o | translate -f en -t he -`"

Replace 'en' and 'he' with the desired source and destination language, if you are not sure, a full list of language codes is available from the ISO 639-2 list.

Examples using D-Bus

If you chose D-Bus, here are few examples.

Finding out what to fill where, is done with the help of the "Launch D-Bus Browser", using that browser you can find what method you wish to call in what application object. Using D-Bus we need to fill some fields, the field name will be regular and the content italic.

Runner

This will display the Runner dialog.

Remote Application: org.kde.krunner

Remote Object: /App

Function: org.kde.krunner.App.display

Audacious next/previous/pause/play/stop/repeat track

Remote Application: org.mpris.audacious

Remote Object: /Player

Function: org.freedesktop.MediaPlayer.Next (replace Next with Prev/Pause/Stop/Play/Repeat)

Audacious PlayPause track

If not playing will play, if playing will pause.

Remote Application: org.mpris.audacious

Remote Object: /org/atheme/audacious

Function: org.atheme.audacious.PlayPause

Klipper manually invoke action menu

display the actions pop-up. (I am using that to search and translate words)

Remote Application: org.kde.klipper

Remote Object: /klipper

Function: org.kde.klipper.klipper.showKlipperManuallyInvokeActionMenu

See also

System Settings

Centrul de control pentru software-ul KDE şi spaţiile de lucru.

Caracteristici

  • Centrul de Control pentru setările platformei globale KDE
  • Personalizează-ţi şi gestionează-ţi desktop-ul într-o locaţie convenabilă
  • Funcţia de căutare ajută la restrângerea setărilor probabile.

Căutare

System Settings are o funcţie de căutare pentru a ajuta la căutarea şi eliminarea unei setări.Pur şi simplu tastaţi un cuvânt cheie în câmpul de căutare din bara de unelte şi Setările de Sistem vor afişa module ce conţin cuvântul cheie şi le ascund pe cele care nu conţin.Modulele Setărilor de Sistem pot fi de asemenea găsite în KRunner.

În căutarea "cheii".

You can also search for and open System Settings modules in KRunner.

Categorii

Aspect şi Comportament Comun

Look and Feel

Customize Plasma in one click.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Workspace Theme]]

Configurează-ţi informaţia de utilizator,parola şi traiectoriile.De asemenea puteţi să vă configuraţi furnizorii Social Desktop ai dumneavoastră.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Color]]

Configurează-ţi aspectul aplicaţiilor tale,culorile,pictogramele,fonturile şi emoticon-urile.

Font

Configure which fonts you want to use in window bars, menus, and elsewhere.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Application Style

Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Startup and Shutdown]] Configurează-ţi comportamentul sistemului atunci când îl porneşti sau opreşti.

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

Hardware

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Input Devices]] Configurează-ţi desktop-ul,mouse-ul şi joystick-ul.

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.

System Settings

Центр управления для приложений и среды KDE.

Возможности

  • System manager for global KDE platform settings
  • Customize and manage your desktop in one convenient location
  • Search function helps narrow down probable settings
  • Pointing at an icon displays a tooltip with more information about it

Поиск

Когда фокус ввода будет на значке окна (выделен), вы можете нажать несколько первых букв названия любого раздела что бы найти и выделить его.

System Settings has a search function to help in hunting down a setting. Simply type in a keyword in the Search field in the toolbar and System Settings will display modules that contain the keyword and hide those that don't.

Searching for "key".

You can also search for and open System Settings modules in KRunner.

Categories

Appearance

Look and Feel

Customize Plasma in one click.

Workspace Theme

Customize your plasma theme, cursor theme, and splash theme all from here.

Color

Настраивайте стиль, цвет, значки, шрифт и смайлики в ваших приложениях.

Font

Настраивайте уведомления, которые вы хотите получать от операционной системы и от приложений.

{{{3}}}

[[Image:

Ассоциация файлов

|48px|link=Special:myLanguage/System Settings/Icons]]||

Устанавливайте действия и значки по умолчанию для различных типов файлов.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Application Style]] Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

Startup and Shutdown

Configure your system behavior when starting up or shutting down.

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

Hardware

Input Devices

Configure your keyboard, mouse and joystick.

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.

System Settings

Kontrollzentrum für KDE Software und Arbeitsplatz

Funktionen

  • Kontrollzentrum für globale KDE Plattform Einstellungen
  • Anpassen und Verwalten Ihres Desktops an einer Stelle
  • Suchfunktionen helfen beim besseren Finden von Einstellungen
  • Wenn Sie auf ein Symbol zeigen, wird ein Infofenster mit mehr Informationen angezeigt

Suche

Wenn der Tastaturfokus auf dem Symbolfenster ist, können Sie die ersten paar Buchstaben eines Symbols eingeben, um es auszuwählen.

Systemeinstellungen hat eine Suchfunktion, um eine Einstellung besser zu finden. Tippen Sie einfach ein Stichwort in das Suchfeld in der Werkzeugleiste ein und Systemeinstellungen wird Ihnen entsprechende Module anzeigen, die das Stichwort enthalten und Module ausblenden, die es nicht enthalten.

Suche nach "key".

You can also search for and open System Settings modules in KRunner.

Kategorien

Gemeinsame Darstellung und Verhalten

Look and Feel

Customize Plasma in one click.

{{{3}}}

[[Image:

Persönliche Informationen

|48px|link=Special:myLanguage/System Settings/Workspace Theme]]||

Konfigurieren Sie Ihre Benutzerinformationen, Kennwort und Pfade. Sie können ebenso Ihren Sozialen-Desktop-Anbieter einstellen.

{{{3}}}

[[Image:

Erscheinungsbild von Anwendungen

|48px|link=Special:myLanguage/System Settings/Color]]||

Konfigurieren Sie Ihr Programm Style, Farben, Symbole, Schriftarten und Smileys.

{{{3}}}

[[Image:

Anwendungs- und Systembenachrichtigungen

|48px|link=Special:myLanguage/System Settings/Fonts (Category)]]||

Passen Sie hier Ihre Zeichensätze an, die Ihr System verwendet.

{{{3}}}

[[Image:

Dateizuordnungen

|48px|link=Special:myLanguage/System Settings/Icons]]||Here you can choose which icon theme to use for your workspace, and how large you want them to be.

{{{3}}}

[[Image:

Regionales

|48px|link=Special:myLanguage/System Settings/Application Style]]||Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Erscheinungsbild und Verhalten der Arbeitsfläche

{{{3}}}

[[Image:

Arbeitsflächen-Effekte

|48px|link=Special:myLanguage/System Settings/Desktop Behavior]]||Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

{{{3}}}

[[Image:

Starten und Beenden

|48px|link=Special:myLanguage/System Settings/Startup and Shutdown]]||Configure your system behavior when starting up or shutting down.

{{{3}}}

[[Image:

Desktopsuche

|48px|link=Special:myLanguage/System Settings/Search]]||Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

{{{3}}}

[[Image:

Zugangshilfen

|48px|link=Special:myLanguage/System Settings/Accessibility]]||Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Netzwerk und Verbindungen

{{{3}}}

[[Image:

Netzwerkeinstellungen

|48px|link=Special:myLanguage/System Settings/Connections]]||Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

Hardware

Eingabegeräte

Konfigurieren Sie Ihre Tastatur, Maus und Joystick.

{{{3}}}

[[Image:

Anzeige und Monitor

|48px|link=Special:myLanguage/System Settings/Display and Monitor]]||Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Energieverwaltung

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.

<translate>

Edit system wide keyboard shortcuts and mouse gestures
Information
If you know something about these preferences then please help us by adding information. Don't worry about formatting. We will help you ensure that your text is properly formatted.



Custom Shortcuts

Here you edit settings for input actions, including mouse gestures.

Standard Keyboard Shortcuts

Here you can configure the keyboard shortcuts for a number of actions common to many applications. This includes actions such as Open, Save, Close, Cut, Copy, Paste, Find, and many more.

Global Keyboard Shortcuts

Global keyboard shortcuts are used to interface with applications that do not display an interface. Settings for such shortcuts are edited here.

</translate><translate>

Mouse Gestures

Note
This section was written for KDE SC version 4.4.4. In KDE SC version 4.5 and later, the layout and organization of the system settings modules has changed somewhat. However, apart from a little moving around of some dialog elements this section should still be valid


Mouse gestures settings.


The place where you start is System Settings -> Input Actions (in KDE SC 4.5 it is System Settings -> Shortcuts and Gestures -> Custom Shortcuts)

Enabling mouse gestures

In the bottom left corner of the window there is a Settings button. Make sure that the Gestures checkbox is checked. Set the timout as you see fit. The mouse button might be different for you, I chose 3 for using the right mouse button. If you want input actions to be enabled automatically, check the "Start the input Actions daemon on login" above.

Also to have any gestures working you need to have the individual gestures themself enabled.

Creating the Mouse gestures actions group

Right click on the left pane (in an empty area under the list of action groups) and choose New Group, rename that group to "Mouse Gestures" and check the checkbox attached to its name.

Creating a new mouse gesture

From now on I will assume that the new group is called "Mouse Gestures". Right click on Mouse Gestures and choose New -> Mouse Gesture Action (here there are three options but I didn't manage to work with "Send Keyboard Input") using "Command/URL" or "D-Bus Command" you will need to create a gesture and bind an action to it.

To create the gesture

Click on your New Action and select the Trigger tab. in the bottom of the screen there is an Edit button (click it). In the box that just opened draw your gesture using the left mouse button.

To bind an action

if you chose Command/URL simply enter that command/url under the Action tab at the Command/URL field.

Examples using Command/URL

Close window

This command will let you close the next window you mouse click on.

Note
wmctrl may not support your Window Manager.


Command/URL: wmctrl -c :SELECT:

to close the active window 

Command/URL: wmctrl -c :ACTIVE:

Translate clipboard content

This command will display a translation of the current clipboard content.

  • Required for this are:
    • xclip
    • libtranslate
Command/URL: kdialog --title "Translation" --msgbox "`xclip -o | translate -f en -t he -`"

Replace 'en' and 'he' with the desired source and destination language, if you are not sure, a full list of language codes is available from the ISO 639-2 list.

Examples using D-Bus

If you chose D-Bus, here are few examples.

Finding out what to fill where, is done with the help of the "Launch D-Bus Browser", using that browser you can find what method you wish to call in what application object. Using D-Bus we need to fill some fields, the field name will be regular and the content italic.

Runner

This will display the Runner dialog.

Remote Application: org.kde.krunner

Remote Object: /App

Function: org.kde.krunner.App.display

Audacious next/previous/pause/play/stop/repeat track

Remote Application: org.mpris.audacious

Remote Object: /Player

Function: org.freedesktop.MediaPlayer.Next (replace Next with Prev/Pause/Stop/Play/Repeat)

Audacious PlayPause track

If not playing will play, if playing will pause.

Remote Application: org.mpris.audacious

Remote Object: /org/atheme/audacious

Function: org.atheme.audacious.PlayPause

Klipper manually invoke action menu

display the actions pop-up. (I am using that to search and translate words)

Remote Application: org.kde.klipper

Remote Object: /klipper

Function: org.kde.klipper.klipper.showKlipperManuallyInvokeActionMenu

See also

</translate>

System Settings

KDE సాప్ట్‍వేర్ మరియు కార్యక్షేత్రాల కొరకు నియంత్రణా కేంద్రం

విశిష్టతలు

  • System manager for global KDE platform settings
  • Customize and manage your desktop in one convenient location
  • Search function helps narrow down probable settings
  • Pointing at an icon displays a tooltip with more information about it

వెతుకు

System Settings has a search function to help in hunting down a setting. Simply type in a keyword in the Search field in the toolbar and System Settings will display modules that contain the keyword and hide those that don't.

Searching for "key".

You can also search for and open System Settings modules in KRunner.

విభాగాలు

సాధారణముగా కనిపించువిధము మరియు ప్రవర్తన

Look and Feel

Customize Plasma in one click.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Workspace Theme]]

మీ వాడుకరి సమాచారాన్ని, సంకేతపదము మరియు త్రోవలను స్వరూపించండి. అంతేకాకుండా మీ సామాజిక డెస్క్‍టాప్ సమకూర్పరులను కూడా స్వరూపించగలరు.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Color]]

మీ అనువర్తనాల శైలి, రంగు, ప్రతీకలు, ఫాంట్లు మరియు భావాలను స్వరూపించు

Font

Configure which fonts you want to use in window bars, menus, and elsewhere.

Icons

Here you can choose which icon theme to use for your workspace, and how large you want them to be.

Application Style

Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..

Workspace

Desktop Behavior

Configure desktop effects such as window animations, transparency, or the desktop cube.

Windows Management

Configure Kwin the KDE windows manager.

Shortcuts

Configure keyboard shortcuts.

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Startup and Shutdown]] మీ వ్యవస్థను ప్రారంభించునపుడు మరియు మూసివేసినపుడు ప్రవర్తనను స్వరూపించండి.

Search

Settings for the desktop search engine and the file indexer.

Personalization

Acccount Details

Manage users and configure password manager.

Regional Settings

Configure language, time formats, date and more

Notifications

Configure notifications.

Applications

Configure default applications, file associations, and more.

Accessibility

Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard.

Online Accounts

Add your google, ownCloud or Twitter account, for a better integration.

Network

Connections

Preferences for your network connections.

Settings

Additional settings about your connection, Konqueror and SMB shares

Bluetooth

Preference about Bluetooth.

హార్డ్వేర్

{{{3}}}

[[Image:{{{2}}}|48px|link=Special:myLanguage/System Settings/Input Devices]] మీ కీబోర్డు, మౌస్ మరియు జాయ్‌స్టిక్‌లను స్వరూపించుకోండి.

Display and Monitor

Configuration of your monitor(s) and screensaver settings.

Multimedia

Configure the handling of audio CDs

Power Management

Global settings for the power manager.

Printers

Configure your printers to work with plasma.

Removable Storage

Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine.

Загальні відомості

Планувальних завдань — графічна оболонка до стандартної програми «cron». За його допомогою можна наказати системі виконувати команди («завдання») у вказані моменти часу, певного дня або дати чи регулярно повторювати певну команду із вказаними користувачем проміжками між виконанням команди.

Планувальник завдано у Плазмі 5

Користування

Засіб плануванян завдань можна запустити за допомогою програми Системні параметри: Запуск і вихід -> Планувальник завдань. За допомогою відповідної сторінки можна додавати нові завдання або редагувати і вилучати наявні.

Додавання і внесення змін до завдань

  • Натисніть кнопку Нове завдання..., щоб додати нове завдання, або кнопку Змінити, щоб внести зміни до наявного запису завдання. У відповідь буде показано вікно Додати або змінити наявне завдання.
Сторінка «Додати або змінити завдання» модуля Системних параметрів
  • Введіть команду, яку слід виконати. Натисніть піктограму з текою, щоб вибрати команду за допомогою діалогового вікна.
  • Вкажіть коментар (необов'язковий). Коментар — це опис, пояснення мети, з якою виконується команда, оскільки це не завжди можна зрозуміти із самої команди.
  • Натисніть Увімкнути це завдання, щоб увімкнути запуск завдання.
  • Позначте пункт Виконувати при запуску системи, щоб увімкнути запуск скрипту під час кожного завантаження системи.
  • Позначте пункт Виконувати щодня, щоб увімкнути виконання скрипту щодня. Відповідні параметри буде вибрано автоматично.
  • Скористайтеся кнопками для вибору команди, яку має бути виконано. Не усі параметри є обов'язковими до визначення. Непотрібні вам поля можна не заповнювати.
    • Параметри годин і хвилин визначають момент дня, коли буде виконано завдання, а не інтервал регулярного виконання.
  • Коли внесення змін буде завершено, натисніть кнопку Гаразд. Завдання буде додано до списку і заплановано, якщо його було увімкнено.
Підказка
Натисніть кнопку Виконати зараз, щоб після додавання або внесення змін до завдання виконати його негайно.


Вилучення завдання

Щоб повністю вилучити завдання, позначте пункт завдання у списку і натисніть кнопку Вилучити. У результаті завдання буде остаточно вилучено.

Змінні середовища

Іноді для виконання певного завдання або декількох завдань потрібно встановити значення певної змінної середовища. Таку змінну середовища слід додати у розділі Змінні середовища. Програма cron використовує власне середовище, загальносистемні змінні та змінні, які визначено користувачем, не використовуються. Натисніть кнопку Нова змінна, щоб додати нове визначення змінної, або кнопку Змінити, щоб змінити наявне змінну.

  • Вкажіть назву змінної. Ця назва:
    • має складатися лише з літер англійської абетки, цифр та символів підкреслювання («_»);
    • має починатися з літери;
    • не повинна збігатися із назвами типових загальносистемних змінних. Щоб дізнатися більше, ознайомтеся із цією сторінкою.
  • Значення, яке міститиме змінна. Це може бути число або рядок.
  • Введіть короткий опис змінної.

Підказки

  • Програма вносить зміни до файлів з каталогу /etc/cron, у якому можна знайти багато корисних файлів розкладів завдань.
  • Щоб переглянути список поточних завдань cron за допомогою командного рядка, віддайте команду 
    crontab -l
    (останньою є мала літера «L»).

Додаткові відомості

<translate>

System Settings

KDE system manager for hardware, software, and workspaces.</translate>

<translate>

Features

  • System manager for global KDE platform settings
  • Customize and manage your desktop in one convenient location
  • Search function helps narrow down probable settings
  • Pointing at an icon displays a tooltip with more information about it

Search

When the keyboard focus is in the icon window, you can type the first few letters of any module name to select it.

System Settings has a search function to help in hunting down a setting. Simply type in a keyword in the Search field in the toolbar and System Settings will display modules that contain the keyword and hide those that don't.</translate>

<translate> Searching for "key".</translate>

<translate> You can also search for and open System Settings modules in KRunner.</translate>

<translate>

Categories

Appearance

</translate>

Look and Feel</translate>

[[Image:<translate>

Preferences-desktop-theme-global.png|48px|link=Special:myLanguage/System Settings/Look And Feel]]||<translate> Customize Plasma in one click.</translate>

Workspace Theme</translate>

[[Image:<translate>

Preferences-desktop-plasma.png|48px|link=Special:myLanguage/System Settings/Workspace Theme]]||<translate> Customize your plasma theme, cursor theme, and splash theme all from here.</translate>

Color </translate>

[[Image:<translate>

Preferences-desktop-color.png|48px|link=Special:myLanguage/System Settings/Color]]||<translate> Here you can choose which color scheme to use on the desktop and in applications. You can also tweak the settings for individual elements. </translate>

Font</translate>

[[Image:<translate>

Preferences-desktop-font.png|48px|link=Special:myLanguage/System Settings/Fonts (Category)]]||<translate> Configure which fonts you want to use in window bars, menus, and elsewhere. </translate>

Icons</translate>

[[Image:<translate>

Preferences-desktop-icons.png|48px|link=Special:myLanguage/System Settings/Icons]]||<translate> Here you can choose which icon theme to use for your workspace, and how large you want them to be. </translate>

Application Style</translate>

[[Image:<translate>

Preferences-desktop-theme.png|48px|link=Special:myLanguage/System Settings/Application Style]]||<translate> Customize your systems widget style (button themes), window decorations (how your titlebars look), and how GNOME (GTK) applications look..</translate>

<translate> === Workspace === </translate>

Desktop Behavior</translate>

[[Image:<translate>

Preferences-desktop.png|48px|link=Special:myLanguage/System Settings/Desktop Behavior]]||<translate> Configure desktop effects such as window animations, transparency, or the desktop cube. </translate>

Windows Management</translate>

[[Image:<translate>

Preferences-system-windows.png|48px|link=Special:myLanguage/System Settings/Windows Management]]||<translate> Configure Kwin the KDE windows manager. </translate>

Shortcuts</translate>

[[Image:<translate>

Preferences-desktop-keyboard.png|48px|link=Special:myLanguage/System Settings/Shortcuts]]||<translate> Configure keyboard shortcuts.</translate>

Startup and Shutdown</translate>

[[Image:<translate>

Preferences-system-login.png|48px|link=Special:myLanguage/System Settings/Startup and Shutdown]]||<translate> Configure your system behavior when starting up or shutting down.</translate>

Search</translate>

[[Image:<translate>

Baloo.png|48px|link=Special:myLanguage/System Settings/Search]]||<translate> Settings for the desktop search engine and the file indexer. </translate>

<translate>

Personalization

</translate>

Acccount Details</translate>

[[Image:<translate>

Preferences-desktop-user.png|48px|link=Special:myLanguage/System Settings/Account Details]]||<translate> Manage users and configure password manager.</translate>

Regional Settings</translate>

[[Image:<translate>

Preferences-desktop-locale.png|48px|link=Special:myLanguage/System Settings/Regional Settings]]||<translate> Configure language, time formats, date and more</translate>

Notifications</translate>

[[Image:<translate>

Preferences-desktop-notification.png|48px|link=Special:myLanguage/System Settings/Notifications]]||<translate> Configure notifications.</translate>

Applications</translate>

[[Image:<translate>

Preferences-desktop-default-applications.png|48px|link=Special:myLanguage/System Settings/Applications]]||<translate> Configure default applications, file associations, and more.</translate>

Accessibility</translate>

[[Image:<translate>

Preferences-desktop-accessibility.png|48px|link=Special:myLanguage/System Settings/Accessibility]]||<translate> Settings to help users who have difficulty hearing audible cues, or who have difficulty using a keyboard. </translate>

Online Accounts</translate>

[[Image:<translate>

Application-internet.png|48px|link=Special:myLanguage/System Settings/Online Accounts]]||<translate> Add your google, ownCloud or Twitter account, for a better integration.</translate>

<translate> === Network=== </translate>

Connections</translate>

[[Image:<translate>

Preferences-system-network.png|48px|link=Special:myLanguage/System Settings/Connections]]||<translate> Preferences for your network connections. </translate>

Settings</translate>

[[Image:<translate>

Preference-system-network.png|48px|link=Special:myLanguage/System Settings/Settings]]||<translate> Additional settings about your connection, Konqueror and SMB shares</translate>

Bluetooth</translate>

[[Image:<translate>

Preferences-system-bluetooth.png|48px|link=Special:myLanguage/Bluedevil]]||<translate> Preference about Bluetooth. </translate>

<translate> ===Hardware=== </translate>

Input Devices</translate>

[[Image:<translate>

Preferences-desktop-peripherals.png|48px|link=Special:myLanguage/System Settings/Input Devices]]||<translate> Configure your keyboard, mouse and joystick.</translate>

Display and Monitor</translate>

[[Image:<translate>

Preferences-desktop-display.png|48px|link=Special:myLanguage/System Settings/Display and Monitor]]||<translate> Configuration of your monitor(s) and screensaver settings. </translate>

Multimedia</translate>

[[Image:<translate>

Applications-multimedia.png|48px|link=Special:myLanguage/System Settings/Multimedia]]||<translate> Configure the handling of audio CDs </translate>

Power Management</translate>

[[Image:<translate>

Preferences-system-power-management.png|48px|link=Special:myLanguage/System Settings/Power Management]]||<translate> Global settings for the power manager. </translate>

Printers</translate>

[[Image:<translate>

Printer.png|48px|link=Special:myLanguage/System Settings/Printers]]||<translate> Configure your printers to work with plasma. </translate>

Removable Storage</translate>

[[Image:<translate>

Drive-removable-media.png|48px|link=Special:myLanguage/System Settings/Removable Storage]]||<translate> Configure automatic handling of removable storage media and which actions are available when a new device is connected to your machine. </translate>

<translate> </translate>

Парамтери покращення зручності роботи для людей з особливими потребами.


За допомогою параметрів цієї сторінки можна зробити роботу у Плазмі зручнішою для людей з особливими потребами.

Інформація
Якщо у системі увімкнено ефекти стільниці ви можете скористатися для покращення зручності користування деякими з параметрів модуля Ефекти стільниці.


Дзвінок

Параметри доступності для звукового супроводу
Параметри доступності для звукового супроводу

За допомогою вкладки Дзвінок ви можете налаштувати системний дзвінок. За допомогою панелі візуального дзвінка ви можете увімкнути або вимкнути візуальний супровід дзвінка-сповіщення системи. Наприклад, якщо під час редагування документа було натиснуто липку клавішу (див. нижче), ви можете наказати системі інвертувати кольори інтерфейсу або змінити колір всього вікна документа на вибраний вами колір.

За допомогою повзунка Тривалість можна вказати проміжок часу у мілісекундах, протягом якого активне вікно змінюватиме свій колір. Менші значення тривалості відповідатимуть коротшій паузі у візуальних дзвінках, а більші — тривалішим візуальним дзвінкам.

Якщо ви користуєтеся цими параметрами, можливо, вам також варто скористатися модулем Сповіщення програм і системи «Системних параметрів».

Якщо вам важко користуватися клавіатурою, на вкладках Клавіші-модифікатори та Фільтри клавіатури ви знайдете корисні пункти, а за допомогою вкладки Жести активації налаштувати жести мишею для емуляції залипання або відкладеного натискання певних клавіш, якщо ви не маєте наміру користуватися цими можливостями весь час.


Клавіші-модифікатори

Параметри доступності для клавіш-модифікаторів
Параметри доступності для клавіш-модифікаторів

Ця вкладка складається з двох панелей: «Липкі клавіші» та «Фіксувальні клавіші». За допомогою липких клавіш простіше вводити клавіатурні скорочення, що складаються з натискання декількох клавіш. Наприклад, якщо вам потрібно ввести велику літеру, доведеться натиснути клавішу Shift і одночасно клавішу з літерою. У режимі липких клавіш ви можете спочатку натиснути клавішу-модифікатор, Shift, Ctrl або Alt, а потім відпустити її і натиснути іншу клавішу. Система сприйматиме такі комбінації, як одночасне натискання обох клавіш.

На більшості клавіатур передбачено 3 клавіші фіксування. Цими клавішами є Caps Lock, Num Lock і Scroll Lock. За допомогою вкладки Клавіші-модифікатори ви можете наказати системі відтворювати звук дзвінка під час вмикання та вимикання режимів фіксування.

Фільтри клавіатури

Параметри доступності для клавіш-фільтрів
Параметри доступності для клавіш-фільтрів

Повільні клавіші

У режимі повільних клавіш для підтвердження натискання клавіші її слід буде утримувати певний час. Якщо клавіша утримуватиметься протягом вказаного часу, системою буде відтворено звук дзвінка. Цей звук підтверджує натискання клавіші, отримання натиснутого знаку, відкидання натискання та всі комбінації з трьох цих випадків.

Пружні клавіші

За допомогою режиму пружних клавіш можна запобігти введенню декількох знаків одночасно у випадку негайного натискання за першою клавішею якихось інших клавіш. Якщо клавішу буде натиснуто протягом вказаного проміжку часу після першої натиснутої клавіші, її натискання не буде зареєстровано, а система відтворить звук дзвінка (гудка).

Допомогти у роботі можуть навіть прості параметри, зокрема збільшення інтервалу реєстрації повторного натискання клавіш.

Under Construction
This is a new page, currently under construction!


Жести активації

Параметри доступності для жестів активації
Параметри доступності для жестів активації

Засіб читання з екрана

Параметри доступності для засобу читання з екрана
Параметри доступності для засобу читання з екрана

Докладніші відомості

Retrieved from "https://wikisandbox.kde.org/index.php?title=Template:SearchPages&oldid=441788"